Philips 40PUT6400 User Manual page 69

Speakers
TV Speakers
You can send the TV sound to a connected audio
device - a Home Theatre System or audio system.
You can select where you want to hear the TV sound
and how you want to control it.
• If you select TV Speakers Off, you permanently
switch off the TV speakers.
• If you select TV Speakers On, the TV speakers are
always on.
With an audio device connected with HDMI CEC, you
can use one of the EasyLink settings.
• If you select EasyLink, the TV sends the TV sound
to the audio device. The TV will switch off the TV
speakers when the device is playing the sound.
• If you select EasyLink Autostart, the TV will switch
on the audio device, send the TV sound to the device
and switch off the TV speakers.
With EasyLink or EasyLink Autostart selected, you can
still switch to TV speakers if necessary.
To set the TV speakers...
1 - Press  , select All Settings and press OK.
2 - Select Sound and press  (right) to enter the
menu.
3 - Select Advanced and press  (right) to enter
the menu.
4 - Select TV Speakers and press  (right) to
enter the menu.
5 - Select TV Speakers On, TV Speakers
Off, EasyLink, or EasyLink Autostart .
6 - Press  (left) repeatedly if necessary, to close
the menu.
To switch to speakers directly...
1 - While watching TV, press  .
2 - Select Speakers and select TV or Audio
System.
3 - Press  (left) repeatedly if necessary, to close
the menu.
Wireless Speakers
What You Need
You can connect a wireless speaker (a subwoofer or a
sound bar) to this TV.
A range of selected Philips wireless speaker products
can connect and play the TV sound. Consult the
Philips website for suited wireless audio products for
this TV - www.philips.com/tv
To play the TV sound on a wireless speaker, you must
pair the wireless speaker with the TV. You can pair up
to 10 wireless speakers but you can only play the
sound on one wireless audio speaker at a time. If you
connect a subwoofer, the sound is played on the TV
and the subwoofer. If you connect a sound bar the
sound is played on the sound bar only.
Select a Speaker
To connect a wireless speaker...
1 - Press  , select All Settings and press OK.
2 - Select Sound and press  (right) to enter the
menu.
3 - Select Wireless Speakers > Connect a
Speaker and press OK.
4 - Press  (left) repeatedly if necessary, to close
the menu.
Remove a Speaker
To remove a wireless speaker...
1 - Press  , select All Settings and press OK.
2 - Select Sound and press  (right) to enter the
menu.
3 - Select Wireless Speakers > Remove a
Speaker and press OK.
4 - Press  (left) repeatedly if necessary, to close
the menu.
Subwoofer Volume
To adjust the volume of wireless speaker...
1 - Press  , select All Settings and press OK.
2 - Select Sound and press  (right) to enter the
menu.
3 - Select Wireless Speakers > Subwoofer
Volume and press OK.
4 - Press  (left) repeatedly if necessary, to close
the menu.
Problems
Lost connection
• Position the wireless speaker within a range of 5
meters from the TV.
• Places with a high amount of wireless activity -
apartments with lots of wireless routers - can hamper
the wireless connection. Keep the router and wireless
speaker as close to the TV as possible.
Audio and video mismatch
• Some wireless speakers systems might have audio
and video sync problems. We recommend using
Philips wireless audio products.
69