Getting Started: Activate The Fila Tracker 902 - FILA FILActive 38-901 User Manual

13 Tracker 902
Getting Started: Activate the Fila Tracker
NOTE: If nothing appears in the display, this could mean that the
battery is fully drained and needs to be recharged immediately.
USB Power
Plug
Insert the Main Unit
to the USB Charging
Clip and plug into the
power source.
The above screen will appear on the Main Unit display when charging.
* The maximum input current for USB charger is 500mA.
TURN YOUR BAND ON
Fila Tracker 902 is shipped in OFF
mode. To activate, simply PRESS & HOLD
the button for 3 seconds.
Blinking dot will
appear during the
charging progress.
When the dot stops
blinking, the charge is
complete.