Naxa NS-439 Instruction Manual page 9

To mount the unit to the wall
1. Mark 4 points on the wall and then drill holes at each
point. (Use the mounting bracket and a level as a guide
when marking the points.)
2. Fix the bracket to the wall with 4 screws.
3. Mount the unit onto the bracket by aligning the 4 slots
on the bottom of the unit with the 4 hooks of the brack-
et.
L ⚠
If mounting onto drywall, you will need to install drywall anchors before screwing the bracket into
the wall.
www.naxa.com Page 9