Advertisement
HBM1001
Body Massager
Instruction Manual
Please read enclosed Instruction Manual
carefully before using.
Keep manual in a safe place for quick easy reference.
Content
SAFETY
PARTS IDENTIFICATION
Content
OPERATION
AFTER USAGE
SAFETY GUARD .................. P1
PARTS IDENTIFICATION ....... P1
REPAIR SERVICE
OPERATION ........................ P2~4
AFTER USAGE ..................... P5
REPAIR SERVICE .................. P6
SR-12B
P1
P1
P2 - 4
P5
P5 - 6
Advertisement
Table of Contents
Related Manuals for nuVita HBM1001
Summary of Contents for nuVita HBM1001
- Page 1 HBM1001 Body Massager Instruction Manual SR-12B Content SAFETY PARTS IDENTIFICATION Content OPERATION P2 - 4 AFTER USAGE SAFETY GUARD ……………… P1 PARTS IDENTIFICATION ….… P1 REPAIR SERVICE P5 - 6 OPERATION …………………… P2~4 AFTER USAGE ………………… P5 REPAIR SERVICE …..…… P6 Please read enclosed Instruction Manual carefully before using.
-
Page 2: Safety Information
SAFETY INFORMATION Keep the unit and packaging material away from children. Only operate with supplied AC adaptor. Do not use if the device or any of its accessories appear to be damaged. Keep the unit and AC adaptor away from water or other liquids or other damp surfaces. Never use in bath, shower, sauna, pool, etc. - Page 3 OPERATION 1. Attach appropriate applicator to the main unit. Face Roller Body Roller 2. Connect the unit to the AC adaptor. Before connection, make sure the unit is set to the OFF position. 3. Hold the unit at handle part and apply the unit on the area to be massaged.
- Page 4 OPERATION Safety Protection When the unit continuously runs for more than 20 minutes, the unit will stop working. This is to avoid the unit from over-heating. Please power off the unit and let it cool down for 1 hour before using again. Caution during operation ・Do not use around the eyes.
- Page 5 OPERATION BODY ・For Body, both Low (Face) setting and High (Body) setting are available. ・Do NOT use on one area for more than 5 minutes, to avoid over-stimulation. ・Shave excess body hair before using. ・Some white flakes of dried skin may surface on body during treatment. After use, clean applicator before storage.
-
Page 6: After Usage
AFTER USAGE Main Unit・Applicator After treatment, remove applicator from main unit, clean and store properly. Use dry cloth to clean main unit. Wash applicators with a mild soap and water. Then, dry with clean dry cloth. Main unit is NOT waterproof. Do not submerge in water. Do not use harsh detergents to clean main unit. - Page 7 REPAIR SERVICE Specification Rating 12V 1A Dimension W85 × D85 × H134.5 mm excluding applicator Unit weight 235g excluding applicator AC adaptor………...1 pc Item # HBMA001 Body Roller…..1 pc Item # HBMR002 Face Roller…..1 pc Item # HBMR001 *NOTE: Please contact your local dealer or retail center for replacement parts. Warranty One year warranty for manufacturing defects under normal usage.
Need help?
Do you have a question about the HBM1001 and is the answer not in the manual?
Questions and answers