Omnis embrace Quick Reference Manual

Understanding Your New Meter

Front of the Embrace No Code Meter
No Code Meter Quick Reference Guide
Note: Please read through
your Meter User Manual
before using this guide.
Test Strip Port
Insert test strip to turn
on the Meter.
Meter Buttons
Press and hold the
middle button on the
side of the meter.
Press middle button
to select different
meter options. Press
and hold middle Meter Display
button to turn on or Shows your blood
off the meter. glucose test results,
memory values,
Press middle button averages, language
to enter control mode selection, data
with test strip inserted, port connection,
or enter set up mode and alarm times.
when not testing.
Note: Please refer to the Embrace No Code instruction manual for more
complete and detailed instructions and important safety warnings.
Understanding Your New Meter
Back of the Embrace No Code Meter
Data Port
Connect an
Omnis Health
data cable here
to send data
into a PC*
*purchased separately
Battery Compartment
Holds two AAA batteries

Setting Date and Time

1. Press and hold the middle
button to turn on the meter.
2. Current year will flash,
adjust to the correct year
by pressing the center
button to confirm your
choice.
3. Current year will flash,
adjust to the correct year
by pressing up or down
with the arrow buttons,
press the center button
in to confirm your choice.
Enter Button Up and Down Buttons

Preparing your lancing device

1. Twist off the lancing device
cap and insert an unused lancet.
2. Twist the protective cover off
from the lancet.
3. Place the lancing device cap
back onto the lancing device and
adjust the puncture setting
(1 is lightest and 5 is deepest).
4. Pull back on the lancing
device.
5. Press the button to lance.
Embrace Lancing Device included in Starter Kit option (see page 4 in User Manual).