Safety Precaution - Danzco DH0070 14G Operation And Parts Manual

⇒
The unit you have purchased may require you to install additional guarding to meet State and
Federal safety requirements.
⇒
Do not move the log when it is being cut or when the saw is down. This action may damage the
bar, chain or other components or could cause bodily harm or injury.
⇒
The log must be clamped before cutting. The bar, chain or other components could be
damaged. You could suffer bodily harm or injury.
⇒
Do not make repairs or adjustments to this product other than those listed in this manual
except when directed to do so by Danzco, Inc.
⇒
All persons working near this machine must wear eye protection and hearing protection.
⇒
Use extreme caution around the cutting chain. It is sharp and may cause bodily harm or
injury.
⇒ Petroleum products are used with this product. Use appropriate caution when operating or
servicing. These products are flammable and may cause eye or skin irritation.
⇒ Always use Danzco, Inc. approved parts when making repairs. Replacement parts must meet
or exceed the specifications of the original equipment manufacturer.
⇒ The information in this manual is subject to change without notification.
⇒ This manual is intended for safe operation and maintenance of the Danzco, Inc., 14G Connect
and Cut Hydraulic Chain Saw. Danzco, Inc., welcomes any and all suggestions on how to
improve this manual or the 14G Connect and Cut Hydraulic Chain Saw.
SAFETY PRECAUTIONS
2