Blade Control Lever; Bypass Linkages - Husqvarna RZ3016 Operator's Manual

CONTROLS
Blade Control Lever
To engage the mower blades, slowly lift the lever up
and into the the lock notch.
_ ARNINGt
No adjustments or maintenance to be
carried out unless:
• the engine stopped
• the ignition key removed
• the parking brake activated
8058-074
Mower deck blade control lever in the disengaged position
Bypass Linkages
Transaxle bypass linkages must be engaged when
pushing or pulling the mower. The release levers are
located on each side of the rear of the unit below the
rear engine plate. See Moving Machine By Hand in
the Operation section.
_ WARNINGt
Bypass linkages are located close to the
muffler. To prevent burns, the engine
should be shut off and allowed to cool
before the bypass linkage levels are
handled,
Set bypass linkages into slots on both sides
8050-018
22