Samsung SEF 20A User Manual page 16

Usinq the flash
...
.,
Using the flash mode
This measures the light entered through the lens and calculates an appropriate level
of exposure while basing on the exposure and shutter speed set to the camera in the
A-TIL mode.
Use of A-TTL mode
1.
Please install the flash after removing the hot-shoe cover of camera.
2.
Turn on the power of flash.
3. The burst mode of flash is set to the A-TIL mode.
4.
When the charging is completed, the light is turned on to jndicate the completion of
charging. Please take pictures after checking whether the flash is fully charged.
Adjusting the amount of flash light
1.
Please install the flash after removing the hot-shoe cover of camera.
2. Turn on the power of flash. , . - - - - - - - - - - - - - ,
3. Adjust the amount of flash light by using the [EV ADJUST]
Darker Brighter
button. .•.
~~ ~l
• • _
The amount of flash light can be adjusted by a step of
0.3EV. For example if you want to have brighter picture,
please set to +0.3 by using the [EV ADJUST] button.
EV ADJUST Button
16