Test Mode - Kenwood KRC-29Y Service Manual

KRC-29Y/35R,379R/RY,479R/RY,481R
QQ
3 7 63 1515 0
1. How to enter the test mode
• Reset the unit while holding the "FM" key and preset "6" key.
• All indication segments go ON at the beginning of the test mode.
2. How to release the test mode
• Simply reset the unit.
• (NOTE) The test mode should not released in conditions of ACC OFF, power OFF, momentary power down or
the panel off.

3. Test mode

• Blanking Skip (B.S) OFF.
• Eject a tape by pressing "ATT" key.
4. Audio adjustment
• Enter the audio mode by pressing the "AUD" key or "OPEN/CLOSE" key on the remote controller.
• Set the volume level to be -10dB. In that case, "30" should be shown on the display.
• Loudness OFF.
• The BASS/MIDDLE/TREBLE and BALANCE/FADER can be adjusted to the full-boost/full-cut and full-front/full-
rear each by pressing the "UP" and "DOWN" keys.
TE
L 13942296513
5. Menu mode
• Enter the menu mode by pressing "CLK" key or "DNPP" key on the remote controller.
• Only on models with RDS function, Local Seeking should be first menu.
www
6
x ao
y
. i
TEST MODE
Q Q
3 6 7
u163
2 9 9 4
8
1 3 1 5 0 5 8 2 9
m
co
.
2 8
9 9
9 4 2 8 9 9