Related Manuals for Logic L26DIGB21
Summary of Contents for Logic L26DIGB21
- Page 1 26” LCD HD Ready 1080p TV Instruction Manual L26DIGB21 L26DIGB21_IB_111003_Annie.indd 1 11年10月3日 下午4:22...
- Page 2 L26DIGB21_IB_111003_Annie.indd 2 11年10月3日 下午4:22...
-
Page 3: Table Of Contents
Contents Preparation......................................5 Unpacking the TV ..........................................5 Installing / Removing the Base Stand ..................................6 Front View and Controls ........................................7 Rear View and Sockets ........................................8 Installing Batteries in the Remote Control ................................9 Remote Control Operation Range ....................................9 Remote Control ..........................................10 Connections.......................................13 Making Video and Audio Connections ..................................13 Connecting an AV Device with an HDMI Cable ..............................13 Connecting a Computer with a VGA Cable ................................14 Connecting an AV Device with a Component (YPbPr) Cable ...........................14 Connecting an AV Device with a SCART Cable ..............................15 Connecting an AV Device with Composite Cable ..............................15 Initial.Setup.......................................16 Turning the TV on for the First Time ..................................16 − Selecting the Input Source....................................17 −... - Page 4 Using.the.Features....................................37 EPG (Electronic Programme Guide) (DTV Mode) ..............................37 − Switch On / Off EPG ......................................37 − Select a Programme ......................................37 Teletext (ATV Mode) ........................................38 − To Turn on Teletext Function................................... 38 Digital Teletext (DTV Mode) ......................................39 − Teletext within Digital Service ..................................39 Entertainment....................................40 Connecting a USB Storage Device ..................................... 40 Viewing Photos ..........................................40 Listening to Music ..........................................41 Viewing Movies ..........................................42 Viewing Texts ............................................
-
Page 5: Preparation
Thank.you .for purchasing your new Logik 26” LCD HD Ready 1080p TV. Your new TV has many features and incorporates the latest technology to enhance your viewing experience. We recommend that you spend some time reading this instruction manual in order that you fully understand these features. You will also find some hints and tips to help you resolve any issues. Read all the safety instructions carefully before use and keep this instruction manual for future reference. Preparation .Unpacking.the.TV Remove all packaging from the TV. Retain the packaging. If you dispose of it please do so according to local regulations. The following items are included: Base Stand (P.N.:.102C2611111) Screws x 4 Remote Control / AAA Batteries x 2 (P.N.:.209030427B1) (P.N.:.504C2436103.&.32200007158) Instruction Manual Quick Start Guide Digital TV Switchcover Addendum (P.N.:.4031C261259) (P.N.:.4033C261214) (P.N.:.4031C241307) If items are missing, or damaged please contact Partmaster (UK only). Tel: 0844 800 3456 for assistance. L26DIGB21_IB_111003_Annie.indd 5 11年10月3日 下午4:22... -
Page 6: Installing / Removing The Base Stand
.Installing./.Removing.the.Base.Stand The LCD display is very fragile, and must be protected at all times when installing and removing the base stand. Be sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with it. DO NOT exert pressure on the front of the TV at any time because the screen could crack. 1.. Disconnect all cables connected to the TV. 2.. Lay the TV down on a flat surface with the back side facing up. Please make sure to place a soft cushioned material (such as a pillow or thick piece of foam) beneath the screen. 3.. To install the base stand, slide in the base stand until screw the screw holes are aligned. Secure the base stand with the 4 screws. Screws x 4 (P.N.:.209030427B1) Slide in Remove the base stand before mounting the TV onto the wall. 4.. To remove the base stand, lay the TV down on a flat unscrew surface with the back side facing up. Please make sure to place a soft cushioned material (such as a pillow or thick piece of foam) beneath the screen. Untighten the 4 screws that hold the base stand to the rear of the TV. Slide the base stand out. Keep all the screws. You will need them if you want to use the base stand option. Screws x 4 (P.N.:.209030427B1) Slide out 5.. Mounting on the wall. This TV is designed to be wall- mounted with a standard 200 mm x 100 mm mounting 200.mm kit designed for flat-panel TVs (sold separately). Mount this TV according to the instructions included in the mounting kit. Due to space restrictions, we recommend that you make all connections (refer to... -
Page 7: Front View And Controls
.Front.View.and.Controls Item Description Illuminates green when the TV is turned on. Illuminates red when the TV is in standby POWER.LED mode. The LED will flash green and red when the timer programming has started in the standby mode. Receives IR signals from the remote control. IR.(Infrared.Receiver) Do not put anything near the sensor, as its function may be affected. Press to select among different input signal sources: SOURCE. DTV / ATV / SCART / YPbPr / PC / HDMI1 / HDMI2 / AV1 (REAR) / AV2 (SIDE) / DMP. MENU Displays the OSD (on screen display) menu. CH.+./.–. Press to select a channel or select a sub-menu from the OSD menu. Adjusts the volume. VOL.+./.–. Press to select and adjust a setting in the OSD menu. Switches the TV on from standby mode. Switches the TV back to standby mode. L26DIGB21_IB_111003_Annie.indd 7 11年10月3日 下午4:22... -
Page 8: Rear View And Sockets
.Rear.View.and.Sockets Video HDMI 2 RF INPUT VGA INPUT AUDIO INPUT AC-INPUT HDMI 1 100-240V~ 50/60Hz SCART Item Description Power.ON/OFF.button Press the POWER.ON/OFF button to turn the TV to standby or off mode. Allows the insertion of a USB storage device to play video, audio, photo and text files (DMP mode) and record DTV programmes on to a USB storage device. To connect to the Composite VIDEO and AUDIO (L/R) output sockets on external video AV2.VIDEO./.AUDIO.(L/R) devices. AC~INPUT Connects the mains cable to the mains socket. To connect to a High-Definition (HD) signal output device, such as a set-top box, blu-ray HDMI1./.HDMI2 disc player or AV receiver. To connect to the Composite VIDEO and AUDIO (L/R) output sockets on external video AV1.VIDEO./.AUDIO.(L/R) devices. To connect to a DVD player, Digital Set-Top-Box, or other AV devices with component Y,.PB,.PR./.AUDIO.(L/R) (YPbPr) video and audio output sockets. VGA.INPUT./.PC.AUDIO. To connect to a computer or other devices with a VGA interface. COMMON.INTERFACE Allows the insertion of a Common Access Module. (Refer to page 22 for details) 10. -
Page 9: Installing Batteries In The Remote Control
.Installing.Batteries.in.the.Remote.Control 1.. Press and lift the back cover to open the battery compartment of the remote control. 2.. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment. 3.. Close the battery compartment cover. Handling.the.Batteries Handling.the.Remote.Control • Improper or incorrect use of batteries may cause • Take care of your fingernails when you press and corrosion or battery leakage, which could cause hold the battery release tab. fire, personal injury or damage to property. • Do not drop or cause impact to the remote control. • Only use the battery type indicated in this manual. • Do not spill water or any liquid on the remote • When the batteries are exhausted, the remote will control. not function. Replace both batteries at the same • Do not place the remote control on a wet object. time with new ones. • Do not place the remote control under direct • Do not install new batteries with used ones and do sunlight or near sources of excessive heat. not mix different types of batteries. • Remove the battery from the remote control • Do not dispose of used batteries as domestic when not in use for a long period of time, as it waste. Dispose of them in accordance with local... -
Page 10: Remote Control
.Remote.Control Switches the TV between on and standby mode. .MUTE Mutes and restores your TV sound. 3.. 0-9.Number.Button • Press to select a programme. • Select numbered items in a menu. (DVD mode) 4.. LIST • Display the channel list. (ATV / DTV mode) • Display the text page on the teletext screen. (ATV mode) .RECALL • Return to the previous viewing channel. (ATV / DTV mode) • Return to menu (DVD mode) 6.. SLEEP Sets the TV sleep timer: OFF / 10 / 20 / … / 180 / 240 min. 7.. VOL.+./.– Adjusts the volume. 8.. CH.+./.– Select a channel. 9.. PROG • Display the channel edit menu. (ATV / DTV mode) • Programme the DVD. (DVD mode) 10..S.MODE Select sound mode: Standard / Music / Movie / Sports / User. 11..ASPECT Allows you to watch the screens in various formats: Auto / 4:3 / 16:9 / Zoom / Subtitle / Smart Zoom / Dot to Dot. - Page 11 19..FAV Display the favourite channel list. (ATV / DTV mode) SETUP Display and exit the DVD setup menu. (DVD mode) 20..i Display the present screen information such as the current channel on ATV / DTV mode and the input source except ATV / DTV mode. 21..TV.RD To switch input source to TV / Digital radio channels. (DTV mode) Eject a disc. (DVD mode) 22..AD.(Audio.Description) • To turn on / off the Audio Description (AD) function (only applicable when the TV programme has this feature). (DTV mode) • Select different Audio mode on DVD mode. (DVD mode) • Select Stereo / Dual Sound Reception. (ATV mode) 23..TEXT Turns on and off the teletext function. (ATV / DTV mode) MENU Display the DVD menu. (DVD mode) 24..S.(Subtitle) • Displays subtitles which are broadcast with the programme. (DTV mode). • Displays subtitles on the DVD. (DVD mode) 25.. .REC Record the current programme. (DTV mode). ZOOM Zoom in on the displayed frame. (DVD mode) 26..Allows you to navigate the DVD menu and adjust the system settings to your preference. (DVD mode) Confirm the selection in the DVD menus. (DVD mode)
- Page 12 31.. To skip to the beginning of the next chapter / track / photo. REVEAL Reveals hidden information such as the answer to a quiz in teletext. (ATV mode). 32.. To skip to the beginning of the previous chapter / track / photo. HOLD Freezes a multi-page passage on screen in teletext. (ATV mode) 33.. To reverse playback rapidly. SUBPAGE Displays the subpage on the teletext screen. (ATV mode) 34.. To advance playback rapidly. INDEX To select the page number of the index from teletext. (ATV mode) 35..Coloured.buttons Access the TELETEXT items or channel edit when using Digital / Freeview TV Channels. (ATV / DTV mode) GOTO.(RED) To skip to a specific location on a DVD / CD. (DVD mode) SLOW.(GREEN) Play video slow. (DVD mode) REPEAT.(YELLOW) Select between different repeat modes. (DVD mode) A–B.(BLUE) Repeat a segment between A and B. (DVD mode) Please note that there are DVD mode functions on the remote control only operate on TV models with a built-in DVD player. L26DIGB21_IB_111003_Annie.indd 12 11年10月3日 下午4:22...
-
Page 13: Connections
Connections .Making.Video.and.Audio.Connections Not all AV devices have the ability to connect to a TV, please refer to the owner’s manual of your AV device for compatibility and connection procedures. When connecting any external AV device, do not connect the mains cable to the mains socket until all other connections are complete. Separate.Audio. Best.Video. Signal.Type Performance Connection.Required HDMI HDMI (480i/480p/576i/576p/720p/1080i/1080p) VGA INPUT Component Video (480i/480p/576i/576p/720p/1080i/1080p) SCART SCART (RGB Input) Composite Video .Connecting.an.AV.Device.with.an.HDMI.Cable • This TV can accept High-Definition Multimedia Interface (HDMI) supports HDCP (High-Bandwidth Digital Content Protection) Protocol. • The TV has a total of 2 HDMI input sockets, please make sure the correct input source is selected corresponding to your connected HDMI input socket. • When you connect to the output of an HD ready player (blu-ray disc player, game console, set-top box or computer) switch to the HDMI function and the TV will automatically detect the resolution used by the HDMI source. • To get the best picture quality, adjust the blu-ray disc player, game console or set-top box output resolution up to 1920 x 1080p. Rear Bottom View of TV 1.. Use an HDMI cable to connect the TV’s HDMI input HDMI 2 socket to the external AV device’s HDMI output socket. RF INPUT VGA INPUT AC-INPUT... -
Page 14: Connecting A Computer With A Vga Cable
.Connecting.a.Computer.with.a.VGA.Cable 1.. Use a VGA cable to connect the TV’s VGA input Rear Bottom View of TV socket to a computer’s VGA output socket. Use an HDMI 2 RF INPUT VGA INPUT AUDIO INPUT AC-INPUT HDMI 1 audio cable to connect the TV’s PC AUDIO input 100-240V~ 50/60Hz SCART socket to the computer’s audio output socket. 2.. Plug the connected devices into the mains socket before switching on the POWER.ON/OFF button which is located at the rear side of the TV. VGA Cable Audio Cable (not included) 3.. Press the. button on the right side panel of the (not included) TV or on the remote control to turn on your TV. 4.. Press the button on the right side panel of the TV or the INPUT button on the remote control to display the Source List. Use the buttons to select PC and then press the.OK button to confirm. -
Page 15: Connecting An Av Device With A Scart Cable
.Connecting.an.AV.Device.with.a.SCART.Cable Rear Bottom View of TV 1.. Use a SCART cable to connect the TV’s SCART input socket to an external AV device’s SCART output HDMI 2 RF INPUT VGA INPUT AUDIO INPUT AC-INPUT HDMI 1 socket. 100-240V~ 50/60Hz SCART 2.. Plug the connected devices into the mains socket before switching on the POWER.ON/OFF button which is located at the rear side of the TV. 3.. Press the. button on the right side panel of the TV or on the remote control to turn on your TV. SCART Cable (not included) 4.. The TV will change the input source to SCART automatically once the AV device is switched on. Set-top Box DVD Player / Recorder Satellite Receiver .Connecting.an.AV.Device.with.Composite.Cable Rear Bottom View of TV 1.. Use an AV cable to connect the TV’s AUDIO(L/R) / VIDEO input sockets to the HDMI 2 RF INPUT... -
Page 16: Initial.setup
Initial.Setup .Turning.the.TV.on.for.the.First.Time 1.. Connect one end of the RF coaxial cable to the aerial socket on the wall and the other end of the cable to the RF (75Ω) socket at the rear bottom side of your TV. Do not connect the TV to the mains supply until you have completed all the connections. RF coaxial cable (not included) HDMI 1 RF INPUT VGA INPUT AUDIO INPUT HDMI 2 SCART 2.. Connect the mains cable to the mains socket after you have completed all the connections. 3.. Switching on the POWER.ON/OFF button which is located at the rear side of the TV. At this stage, the TV switches to standby mode. The red LED indicator will illuminate on the front panel of the To the mains 4.. In standby mode, press the. button on the right socket side panel of the TV or on the remote control to turn the TV on. The red LED indicator will turn green. • Always disconnect the TV from the mains socket when not in use for a long period of time. -
Page 17: Selecting The Input Source
7.. Channel tuning will commence. This operation may take up to 6 Channel Tuning minutes. The display will show the progress of the tuning and the number of channels found. : 3 Channel(s) 8.. If you want to skip the ATV tuning, press the MENU button to : 0 Channel(s) interrupt the tuning half way. A pop-up screen will be displayed, Radio : 0 Channel(s) press the button to select YES to confirm. You will then go Data : 0 Channel(s) straight to DTV tuning. You may repeat the above step if you also want to skip the DTV tuning. An installation reminder will appear 36%... 668.75MHz (TV) the next time you turn on the TV. 9.. After tuning is complete, the channels are arranged in a preset Please press MENU to skip. order. If you wish to skip channels, modify the preset order or rename channels, select Channel.Edit under the Channel menu (refer to page 20-21 for details). -
Page 18: Customising.tv.settings
Customising.TV.Settings .Channel.Setting.(TV,.DTV.or.Radio.Mode) Auto.Tuning Use this to automatically find and store all available channels. This is normally recommended if some channels have been added or removed by the broadcaster or if you have moved house. 1.. Press the MENU button and then press the buttons to select the CHANNEL menu and then press the OK button. CHANNEL PICTURE SOUND TIME OPTION LOCK EXIT EXIT 2.. Press the buttons to select Auto.Tuning and then press the OK button. Auto Tuning DTV Manual Tuning ATV Manual Tuning Channel Edit Signal Information CI Information Software Update(OAD)Off Software Update(USB) 3.. In the Tune.Type menu, press the buttons to select ATV./.DTV./. Tune Type DTV+ATV DTV.+.ATV. Press the button and then press the... -
Page 19: Dtv Manual Tuning
DTV.Manual.Tuning Allows you to make manual fine tuning adjustments of the channel under DTV mode. 1.. Press the MENU button and then press the buttons to select the CHANNEL menu and then press the OK button. CHANNEL PICTURE SOUND TIME OPTION LOCK EXIT EXIT 2.. Press the buttons to select DTV.Manual.Tuning and then press the OK button. Auto Tuning DTV Manual Tuning ATV Manual Tuning Channel Edit Signal Information CI Information Software Update(OAD)Off Software Update(USB) 3.. The DTV Manual Tuning screen will pop up. Press the buttons DTV Manual Tuning to select the desired UHF channel and then press the OK button to commence the search of that channel. When the signal has been tuned,... -
Page 20: Channel Edit (Atv / Dtv Mode)
3.. The ATV Manual Tuning screen will pop up. Use the buttons to select ATV Manual Tuning the following options and the buttons to adjust the setting. Storage To 1 Storage.To Presets the channel number. Sound System I Selects the sound system: I / DK / BG / L (for Sound.System SECAM). Current CH 1 Current.CH Displays the current channel number. Search Press the buttons to start the manual Search tuning. Fine-Tune Press the buttons to make manual fine Fine-Tune tuning adjustments. Frequency 255.25 MHz Frequency Displays the current tuned frequency. -
Page 21: Signal Information (Dtv Mode)
c.. Move Press the YELLOW button and then press the buttons to move to the selected channel. Press the YELLOW button or the OK button to confirm. d.. Skip Press the BLUE button to skip the selected channel. Press the BLUE button again to undo it. e.. FAV (Favourite) Press the FAV button to set the selected channel as one of the favourite programmes. Press the FAV button again to undo it. 4.. Press the MENU button to return back to the main menu. 5.. Press the EXIT button to exit the menu. Care should be taken when editing the position of digital channels as this may affect EPG and reminder settings. Signal.Information.(DTV.Mode) Allows you to view the signal information. 1.. Press the MENU button and then press the buttons to select the CHANNEL menu and then press the OK button. CHANNEL PICTURE SOUND TIME OPTION LOCK EXIT EXIT 2.. Press the buttons to select Signal.Information and then press the OK button to view the signal information. Auto Tuning DTV Manual Tuning ATV Manual Tuning Channel Edit... -
Page 22: Ci (Common Interface) (Dtv Mode)
CI.(Common.Interface).(DTV.Mode) The common interface allows the use of a Common Access Module to enable you to view scrambled (pay to view) services. These services are provided by TopUp TV (UK only) and others. The Common Access Module and viewing card can be obtained from the service provider. Rear Bottom View of TV Do not repeatedly insert or remove the Common Access Module as this HDMI 2 RF INPUT VGA INPUT AUDIO INPUT AC-INPUT HDMI 1 100-240V~ 50/60Hz may damage the interface and cause a SCART malfunction. CI.(Common.Interface) Allows the Common Access Module This feature is not available in all countries. to be inserted and access the content that has been encrypted. To.insert.the.Common.Access.Module 1.. Before you insert the Common Access Module, ensure that the TV is switched off and the viewing card is inserted in accordance with the Service Provider’s instructions. 2.. Insert the Common Access Module into the slot. Flip the Common Access Module to another side and try again if you feel resistance. -
Page 23: Software Update (Over Air Download)
Software.Update.(Over.Air.Download) The TV auto detects the latest firmware through the DTV signal and allows you to accept or refuse the firmware upgrade service. 1.. Press the MENU button and then press the buttons to select the CHANNEL menu and then press the OK button. CHANNEL PICTURE SOUND TIME OPTION LOCK EXIT EXIT 2.. Press the buttons to select Software.Update(OAD) and then press the OK button to select On. Auto Tuning DTV Manual Tuning 3.. Press the BACK button to return to the previous menu or press the ATV Manual Tuning MENU button to return back to the main menu. Channel Edit Signal Information 4.. Press the EXIT button to exit the menu. CI Information Software Update(OAD)Off Software Update(USB) 5.. -
Page 24: Picture Setting
.Picture.Setting Allows you to set your preferred picture mode. 1.. Press the MENU button and then press the buttons to select the PICTURE menu and then press the OK button. CHANNEL PICTURE SOUND TIME OPTION LOCK EXIT EXIT 2.. Press the buttons to select the following picture options and then press the OK button. Picture Mode Standard Colour Temperature Aspect Ratio Noise Reduction Screen 3.. Press the buttons to select the options. Press the OK button and then press the buttons to adjust each option’s setting. Picture.Mode Cycles among picture mode: Standard / Mild / User / Dynamic. Alternative You may press the P.MODE button to select the picture mode directly. Contrast Adjusts the difference between light and dark levels in the picture. (for User mode) Picture Mode Standard... - Page 25 Aspect.Ratio Allows you to watch the screen in various picture formats: Auto / 4:3 / 16:9 / Zoom / Subtitle / Smart Zoom / Dot to Dot. Input.Signal.4:3 Input.Signal.16:9 Auto This selection will display This selection will display the picture according to the picture according to the aspect ratio of the the aspect ratio of the input source. input source. This selection will allow This selection will allow you to view a picture with you to adjust the picture an original 4:3 aspect horizontally, in linear ratio. Black bars will proportion. Black bars will appear on both the left appear on both the left and right of the screen. and right of the screen. 16:9 This selection will allow This selection will allow you to adjust the picture you to view a picture with horizontally, in linear an original 16:9 aspect proportion, to fill the entire ratio. screen. Zoom This selection will allow This selection will allow you to zoom in the you to zoom in the picture without any picture without any...
-
Page 26: Sound Setting
.Sound.Setting Allows you to select an audio-enhancement technique. 1.. Press the MENU button and then press the buttons to select the SOUND menu and then press the OK button. CHANNEL PICTURE SOUND TIME OPTION LOCK EXIT EXIT 2.. Press the buttons to select the following sound options and then press the OK button. Sound Mode Standard Balance Auto Volume SRS TruSurround HD Off AD Switch 3.. Press the buttons to select the options. Press the OK button and then press the buttons to adjust each option’s setting. Sound.Mode Allows the selection of an audio-enhancement technique: Standard / Music / Movie / Sports / User. Alternative You may press the S.MODE button to select the sound mode directly. Treble Controls the relative intensity of higher pitched sounds. (for User mode) Bass... -
Page 27: Stereo / Dual Sound Reception (Atv Mode)
Stereo./.Dual.Sound.Reception.(ATV.Mode) When a programme is selected, press the AD button to display the sound information for the selected station. Broadcast On.Screen.Display Mono MONO / NICAM MONO Stereo MONO / NICAM STEREO Dual MONO / NICAM DUAL I, NICAM DUAL II, NICAM DUAL I+II Mono.sound.selection If the stereo signal is weak in stereo reception, you can switch to mono by pressing the AD button. In mono reception, the clarity of sound is improved. To switch back to stereo, press the AD button again. Language.selection.for.dual.language.broadcast If a programme can be received in two languages (dual language), you can switch to NICAM.DUAL.I, NICAM.DUAL.II, NICAM. DUAL.I+II.or MONO by pressing the AD button repeatedly. Sends the primary broadcast language to the loudspeakers NICAM DUAL I Sends the secondary broadcast language to the loudspeakers NICAM DUAL II NICAM DUAL I+II Sends the primary and secondary broadcast languages to the loudspeakers .Time.Settings... -
Page 28: Option Setting
3.. Press the buttons to select the options. Press the OK button and then press the buttons to adjust each option’s setting. Clock The clock is set automatically when receiving a digital signal. Off.Time Allows you to set the off time that will automatically switch off the TV. Cycle through and select from the following off time options: Off / Once / Every Day / Mon.~Fri. / Mon.~Sat. / Sat.~Sun. / Sunday. On.Time Allows you to set the on time that the TV will automatically switch on the TV and tune to the source, channel and volume you select. Cycle through and select from the following on time options: Off / Once / Every Day / Mon.~Fri. / Mon.~Sat. / Sat.~Sun. / Sunday. Sleep.Timer The sleep timer automatically switches the TV to standby after the preset time has elapsed. The clock will be set automatically when receiving a digital signal. Time must be set before using Sleep Timer function. Press the buttons to select a period of time after which the TV automatically switches to standby mode: OFF / 10 / 20 / … / 180 / 240 min. The timer begins to count down from the number of minutes selected. If you turn the TV off after setting the sleep timer, the sleep timer setting will be erased. Alternative 1.. You may press the SLEEP button repeatedly to select the number of minutes: OFF / 10 / 20 / … / 180 / 240 min directly. 2.. To cancel the sleep time, press the SLEEP button repeatedly until Off appears. Auto.Standby The unit will automatically switch to standby mode 4 hours after the last time the remote control was used. A reminder screen will pop up and count The unit will automatically switch to standby down before the unit switches to standby mode. -
Page 29: Audio Language (Dtv Mode)
2.. Press the buttons to select OSD.Language and then press the OK button. The default on-screen menu language is set as English. OSD Language English Audio Language Subtitle Language Hearing Impaired Country PVR File System Restore Factory Default 3.. Press the buttons to navigate the menu and change the OSD Language settings. Press the OK button to confirm. Cesky English Fran ais 4.. Press the BACK button to return to the previous menu or press the MENU button to return back to the main menu. Espanol Dansk Hrvatski 5.. Press the EXIT button to exit the menu. Deutsch Italiano BACK EXIT MENU... -
Page 30: Subtitle Language (Dtv Mode)
Subtitle.Language.(DTV.Mode) Allows you to select your desired subtitle language or turn off the subtitle. (Available for digital channels if multiple subtitle languages are broadcast.) 1.. Press the MENU button and then press the buttons to select the OPTION menu and then press the OK button. CHANNEL PICTURE SOUND TIME OPTION LOCK EXIT EXIT 2.. Press the buttons to select Subtitle.Language and then press the OK button. OSD Language Audio Language 3.. Press the buttons to select the Primary / Secondary Subtitle Subtitle Language English Language. Press the button and then press the buttons to Hearing Impaired Country select your desired subtitle language. Press the OK button to confirm. PVR File System 4.. -
Page 31: Pvr File System (Dtv Mode)
PVR.File.System.(DTV.Mode) Allows you to select your preferences in the PVR File System. 1.. Press the MENU button and then press the buttons to select the OPTION menu and then press the OK button. CHANNEL PICTURE SOUND TIME OPTION LOCK EXIT EXIT 2.. Press the buttons to select PVR.File.System and then press the OK button. OSD Language Audio Language Subtitle Language Hearing Impaired Country PVR File System Restore Factory Default 3.. Press the buttons to select the following PVR File System options and then press the OK button. Select.Disk Select the disk where you want to store your recorded content. Check.PVR.File. Press the OK button, the system will now System Select Disk... -
Page 32: Cec (Consumer Electronics Control)
CEC.(Consumer.Electronics.Control) Allows you to command and control two or more CEC-enabled devices, that are connected through HDMI, by using only one of the TV remote controls (e.g. controlling a TV set, set-top box and DVD player using only the remote control of the TV). CEC also allows individual CEC-enabled devices to command and control each other without user intervention. Make sure that your CEC compliant device is connected to your TV using a HDMI cable and the correct HDMI input source is selected prior to using this function. (Some HDMI cables may not support HDMI-CEC functions.) 1.. Press the MENU button and then press the buttons to select the OPTION menu and then press the OK button. CHANNEL PICTURE SOUND TIME OPTION LOCK EXIT EXIT 2.. Press the buttons to select CEC and then press the OK button to select On./.Off. OSD Language Audio Language 3.. Press the BACK button to return to the previous menu or press the Subtitle Language MENU button to return back to the main menu. Hearing Impaired Country PVR File System 4.. Press the EXIT button to exit the menu. CEC Off Restore Factory Default • This unit can only communicate with HDMI-CEC compatible devices. -
Page 33: Lock Setting
3.. Press the button to select “Yes”. The TV will turn off and restart after a few seconds. Press the button to select "No" to cancel and return to the main menu. Are you sure? All channel and user settings will be lost and the TV will revert to "First Time Installation". .LOCK.Setting To access the LOCK menu, you must enter the password. Enter the default password “6666” for first time use. To change the password, refer to “Change.Password” (see below). Lock.System The Lock System is designed to prevent accidental retuning of the TV / losing channels and prevent children watching unsuitable programmes. The Lock System must be set to On for this function to operate. If the Lock System is set to On, a valid password must be entered when you access Auto Tuning / Manual Tuning / Restore Factory Default. 1.. Press the MENU button and then press the buttons to select the LOCK menu and then press the OK button. CHANNEL PICTURE SOUND TIME OPTION LOCK EXIT EXIT 2.. Press the buttons to select Lock.System and then press the OK button. Lock System Set Password Block Channel Parental Guidance Off 3.. -
Page 34: Set Password
Set.Password 1.. Press the MENU button and then press the buttons to select the LOCK menu and then press the OK button. CHANNEL PICTURE SOUND TIME OPTION LOCK EXIT EXIT 2.. Press the buttons to select Lock.System and then press the OK button. Lock System Set Password Block Channel Parental Guidance Off 3.. Use the 0-9 buttons to input a 4-digit password to enter the LOCK menu. The default password is “6666”. Please enter password If you change the password, be sure to remember the new password! If you forget the new password, press the master password“9527”. Clear Cancel 4.. Press the buttons to select Set.Password and then press the OK button. -
Page 35: Block Channel
Block.Channel Block Channel is designed to prevent children watching unsuitable programmes. When a channel is blocked, a valid password must be entered. 1.. Press the MENU button and then press the buttons to select the LOCK menu and then press the OK button. CHANNEL PICTURE SOUND TIME OPTION LOCK EXIT EXIT 2.. Press the buttons to select Lock.System and then press the OK button. Lock System Set Password Block Channel Parental Guidance Off 3.. Use the 0-9 buttons to input a 4-digit password to enter the LOCK menu. The default password is “6666”. Please enter password If you change the password, be sure to remember the new password! If you forget the new password, press the master password“9527”. Cancel Clear 4.. Press the buttons to select Block.Channel and then press the OK button. -
Page 36: Parental Guidance
Parental.Guidance This function allows you to set up blocking schemes to block specific channels and ratings. It operates according to information from the broadcasting station, therefore if the signal has incorrect information, this function will not operate. This TV is programmed to remember which option it was last set to even if you switch the TV off. When a programme is locked or rated with delayed state, a valid password must be entered. 1.. Press the MENU button and then press the buttons to select the LOCK menu and then press the OK button. CHANNEL PICTURE SOUND TIME OPTION LOCK EXIT EXIT 2.. Press the buttons to select Lock.System and then press the OK button. Lock System Set Password Block Channel Parental Guidance Off 3.. Use the 0-9 buttons to input a 4-digit password to enter the LOCK menu. The default password is “6666”. Please enter password If you change the password, be sure to remember the new password! If you forget the new password, press the master password“9527”. Cancel Clear 4.. -
Page 37: Using.the.features
Using.the.Features .EPG.(Electronic.Programme.Guide).(DTV.Mode) This system has an Electronic Programme Guide (EPG) to help you navigate through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of programme information will vary, depending on the particular broadcaster). This function can be used only when the EPG information is broadcast by broadcasting companies. The EPG displays the programme details for the next 7 days. Switch.On./.Off.EPG 1.. Press the GUIDE button to switch on EPG. 2.. Press the GUIDE button or the EXIT button again to switch off EPG and return to normal TV viewing. current channel PROGRAMME GUIDE SZTVM02 number and name 2011 17/ Jan 22:07 15:55.16:25 Movie 1 current date and time programme title 17 Jan programme date 16:00 17:00 programme time 800 France 2 Information channel no. 801 France 4 Movie 1 802 France 5 Programme 2... -
Page 38: Teletext (Atv Mode)
.Teletext.(ATV.Mode) Teletext is a free service broadcast by some TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. Using the Teletext control buttons you can view pages of information that are listed in the teletext index. To.Turn.on.Teletext.Function Make sure the TV channel you are watching transmits teletext. “No Teletext” sign will show on the screen if teletext is not available. In ATV mode, press the TEXT.button to enter Teletext mode. Press the INDEX.button to display the index page. Press the TEXT button once to exit and the TV will return to the channel you were watching. To.select.a.page.of.text Find the number of the page in the index and enter it using the 0-9 buttons. The number of the page will appear on the top left corner of the screen. The page counter will search for your page. When it finds it, the page will be displayed. To move to the next page of text, press the CH.+.button. To move to the previous page, press the CH.– button. To return to the index page, press the INDEX button. Press the TEXT button to display the teletext page and then press the MIX button. The text will be superimposed over the TV programme. Press the MIX button again to return to the text page. Double.height.text If you have difficulty reading the text on the TV you can double the height of the text. Press the SIZE button. The top half of the page will be displayed in double height text. Press the SIZE button again. The bottom half of the page will be displayed in double height text. Press the SIZE button again to return to the full page. Page.STOP If the page of text you have selected contains subpages, these subpages will automatically be displayed in order with a delay to allow you to have enough time to read the page. Press the HOLD button. “ ” will appear on the top left corner of the screen. While the page is on-hold, press the buttons to scroll through the subpages in your own time. Alternatively, press the SUBPAGE button, use the colour buttons to scroll through the subpages. To.Reveal.Information Press the REVEAL button to reveal concealed information (quiz answers etc.). Press the REVEAL button again to conceal the information again. Fasttext At the bottom of the teletext screen is a row of subject headings in red, green, yellow and blue. The remote control has a row of colour buttons corresponding to the row of coloured subjects on the screen. Pressing one of the colour buttons will take you directly to the page corresponding to the subject heading. L26DIGB21_IB_111003_Annie.indd 38 11年10月3日... -
Page 39: Digital Teletext (Dtv Mode)
.Digital.Teletext.(DTV.Mode) Digital teletext can access special digital teletext services and specific services which broadcast digital teletext. You will need to turn off Subtitle.Function before using teletext (refer to page 30 for details). Teletext.within.Digital.Service 1.. In DTV mode, press the LIST button to display the Channel List. Press the buttons and then press the OK button to select the teletext channel. Press the LIST button to exit the Channel List and the teletext page will be displayed after a few seconds. Alternative Press the TEXT button while watching some programmes to reveal the teletext page (MHEG). 2.. Follow the instructions on digital teletext and move onto the next step by pressing OK, , RED, GREEN, YELLOW, BLUE or 0-9 buttons etc. 3.. To change digital teletext service, select a different service by pressing the 0-9 buttons. L26DIGB21_IB_111003_Annie.indd 39 11年10月3日 下午4:24... -
Page 40: Entertainment
Entertainment .Connecting.a.USB.Storage.Device Rear Left Side of TV 1.. Switch off the TV before connecting any USB storage device. 2.. Connect your USB storage device to the USB port of your TV. 3.. Plug the connected devices into the mains socket before switching on the POWER.ON/OFF button which is located at the rear side of the TV. 4.. Press the. button on the right side panel of the TV or on the remote control to turn on your TV and your USB storage device. USB Cable (not included) 5.. Press the button on the right side panel of the TV or the INPUT button on the remote control to display the Source List. Use the buttons to select DMP and then press the OK button to confirm. USB Hub Adapter Portable hard Disk • If a hard disk is used, make sure its mains adapter is connected to the mains supply. • If a USB hub is used, make sure its mains adapter is connected to the mains supply as the total current consumption may exceed 500mA. • The maximum supported storage space of the hard disk is 250 GB. • The file system only supports FAT32 format. • If you want to store the video streaming of a DTV programme, the transfer rate of the USB storage device must not be less than 5MB/s, otherwise the picture and sound of the programme will be affected and a warning statement will be shown on the screen. If this happens, please upgrade your USB storage device. -
Page 41: Listening To Music
4.. Press the buttons to navigate in the picture folder. Select the picture file and then press the .PLAY button to view. 5.. Press the i button to display the function bar. Press the buttons and then press the OK button to select the function: Pause / Prev. / Next / Stop / Repeat All / Music / Playlist / Info / Rotate clockwise / Rotate anti- clockwise / Zoom In / Zoom Out / Move View. 6.. Press the EXIT button to return back to the previous menu. .Listening.to.Music 1.. Press the button on the right side panel of the TV or the INPUT button on the remote control then press the buttons to select the DMP mode and then press the OK button. 2.. Press the buttons to select MUSIC and then press the OK button. 3.. Press the buttons to select your storage device and then press the OK button. 4.. Press the buttons to navigate in the music folder. Select the music you want to play and then press the .PLAY button to play it. • Some audio file formats will not be supported. • Supported file formats: mp3 / wma 5.. Press the buttons to navigate in the music folder. Select the music you want to play, it will show the music information (Album / Title / Bit Rate / Artist / Sampling / Year / Size). Then press the... -
Page 42: Viewing Movies
.Watching.Movies 1.. Press the button on the right side panel of the TV or the INPUT button on the remote control then press the buttons to select the DMP mode and then press the OK button. 2.. Press the buttons to select MOVIE and then press the OK button. 3.. Press the buttons to select your storage device and then press the OK button. 4.. Press the buttons to navigate in the movie folder. Select the movie file and then press the .PLAY button to playback. • Some audio file formats will not be supported. • Supported file formats: MPEG1/2 5.. Press the i button to display the function bar. Press the buttons and then press the OK button to select the function: Pause / FB / FF / Prev. / Next / Stop / Repeat All / Set A / Playlist / Info / Aspect Ratio. 6.. Press the EXIT button to return back to the previous menu. L26DIGB21_IB_111003_Annie.indd 42 11年10月3日 下午4:24... -
Page 43: Viewing Texts
.Viewing.Texts 1.. Press the button on the right side panel of the TV or the INPUT button on the remote control then press the buttons to select the DMP mode and then press the OK button. 2.. Press the buttons to select TEXT and then press the OK button. 3.. Press the buttons to select your storage device and then press the OK button. 4.. Press the buttons to navigate in the text folder. Select the text .PLAY button to view. file and then press the 5.. Press the i button to display the function bar. Press the buttons and then press the OK button to select the function: Prev. page / Next page / Prev. / Next / Stop / Music / Playlist / Info. 6.. Press the EXIT button to return back to the previous menu. L26DIGB21_IB_111003_Annie.indd 43 11年10月3日 下午4:24... -
Page 44: Pvr.(Personal.video.recorder)
PVR.(Personal.Video.Recorder) .Time.Shift.Function This function allows the TV to virtually record the live viewing broadcast programme. If the transfer rate of the USB storage device is too slow • Time Shift Mode and Recording functions for recording or time shift function, a warning statement may not work if the signal strength is weak. will be shown on the screen. If this happens, please • Stop the time-shift function before upgrade your USB storage device. switching to another input source. During normal TV viewing, you may press the button to virtually pause the live viewing broadcast programme if you want to go out for a while (e.g. going to the bathroom / kitchen). When you have returned, press the .PLAY button to play the missed broadcast programme. The PVR Time Shift progress bar will be displayed on the screen. There may be a few seconds delay in video and sound when the units starts to playback the missed broadcast programme. It will return to normal. The.‘PVR.Time.Shift.Progress.Bar’ 1 Indicates the status of the currently displayed video ( / / 2 Indicates the time lagging behind the live broadcast (DVR reviewing) 3 Indicates the available recording time on your USB storage device 4 Indicates the current time Using.the.Remote.Control You can shift playback to any point of the virtually recorded programme. When playing, or • Press the button repeatedly to speed up x 2 / x 4 / x 8 / x 16. -
Page 45: Recording Dtv Programme Onto A Usb Storage Device
.Recording.DTV.Programme.onto.a.USB.Storage.Device Use this function to record the DTV programme you are watching on the main screen and save it for future viewing. The recording from timer programme or direct recording may have a little bit of delay when it starts to record the broadcast programme. Please make sure the USB device is inserted. If not, a warning message will pop up. 1.. Press the REC button to record the programme that you are currently watching. 2.. Press the .REC button again, the recording progress bar will disappear. 3.. Press the .Stop button to stop recording. Recording will stop automatically when the disk is full. If you want to turn off your TV during recording, press the button. The screen will turn off but the recording will still continue, the LED indicator will alternatively flash red and green. .Timer.Programming This function is used to perform scheduled recording. The recording from timer programme or direct recording may have a little bit of delay when it starts to record the broadcast programme. Please make sure the USB device is inserted. If not, a warning message will pop up. 1.. Press the GUIDE button on the remote control. The EPG menu will appear. PROGRAMME GUIDE SZTVM02 2011 17/ Jan 22:07 15:55.16:25 Movie 1 17 Jan 16:00 17:00 800 France 2 Information... -
Page 46: Play Recorded Programme
3.. After finishing all the recorder adjustments, press the OK button to confirm your settings. • After confirmation, you can press the GREEN button to view your scheduled recording in the Schedule.list. • If a programme recording starts when the TV is in standby mode, the green / red LED indicator will flash. .Play.Recorded.Programme. You can play a recorded programme from the recorded programme list or from a USB Storage Device. 1.. Press the INPUT button then press the buttons to select the DMP mode and then press the OK button. 2.. Press the buttons to select MOVIE and then press the OK button. 3.. Press the buttons to select your storage device and then press the OK button. 4.. Press the buttons to select the "MY.PVR" folder and then press the OK button. Press the buttons to navigate in the "MY.PVR" folder. Select your recorded programme and then press the PLAY button to view. 5.. Press the i button to display the function bar. 6.. Press the buttons and then press the OK button to select the function: Pause / FB / FF / Prev. / Next / Stop / Repeat All / Set A / Playlist / Info / Aspect Ratio. 7.. -
Page 47: Maintenance
Maintenance .Maintenance Careful and regular cleaning can prolong the life of your TV. Be sure to switch off the. .button on the side panel of the TV or on the remote control and then switch off the POWER.ON/OFF button which is located at the rear side of the TV. Disconnect the mains cable from the mains socket before any cleaning. 1.. Use a soft dry cloth to wipe away the dust from the screen and surfaces. 2.. If the surfaces are extremely dirty, clean the TV with a cloth which has been dipped in a weak soapy water. Wring the cloth until it is almost dry, then use it to wipe the TV. 3.. Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching the TV on. Never use alcohol, benzine, paint-thinner, cleaning fluid or other chemicals. Do not use compressed air to remove dust. .Hints.and.Tips The following table contains various hints and tips to get the best performance from your TV. If you require additional assistance please call our UK Call Centre on 0844.561.1234. Our UK Customer Contact Centre is open Monday-Saturday 8am-8pm or Sunday 8am-6pm. The.TV.does.not.operate.properly. The.TV.does.not.respond.when. • The TV may freeze up during use. Disconnect the mains cable from the mains socket pressing.any.buttons for a few minutes. Reconnect the mains cable and try to operate it again as usual. • Check that the TV is connected to the mains supply and the POWER.ON/OFF TV.cannot.be.switched.on button which is located at the rear side of the TV is switched on. • Make sure all connected AV devices are switched off before switching on your TV. • Check to see if there are any objects between the TV and the remote control causing an obstruction. Ensure that you are pointing the remote control directly at The.remote.control.does.not.work the TV. • Ensure that the batteries are installed with the correct polarity (+ to +, - to -). - Page 48 The.audio.function.does.not.work. • Press the VOL + / - buttons. Picture.OK.but.no.sound • Sound muted? Press the .MUTE button. • Try another channel. The problem may be caused by the broadcaster. No.output.from.one.of.the.speakers • Adjust the Balance settings in the SOUND menu. • A change in ambient humidity or temperature may result in an unusual noise when Unusual.sound.from.Inside.the.TV the TV is switched on or off and does not indicate a fault with the TV. No.sound.when.connecting.HDMI • Check if the input source is HDMI1./.HDMI2. Audio.noise • Keep the RF coaxial cable away from the other connected cables. Password • Select the Set.Password setting in the LOCK menu, then enter the following master Lost.password password “9527”. The master password clears your previous password and allows you to enter a new password. There.is.a.problem.in.PC.mode. The.signal.is.out.of.range.(Invalid. • Adjust the resolution, horizontal frequency, or vertical frequency. format) Vertical.bar.or.stripe.on.background. • Use Auto configure or adjust clock, phase, or H/V position. &.Horizontal.Noise.&.Incorrect. position Screen.colour.is.unstable.or.single. • Check the signal cable. colour • Reinstall the PC video card.
-
Page 49: Display.modes
Display.Modes .Display.Modes The screen resolution has been optimised during production for the display modes listed below. Whilst the TV is capable of accepting a 1080p input, it is not capable of displaying this screen resolution and therefore the display will be scaled to fit the native resolution of the screen automatically. YPbPr.Mode Resolution Vertical.Frequency.(Hz) Aspect.Ratio 480I: 720 x 480 480P: 720 x 480 576I: 720 x 576 576P: 720 x 576 Auto / Smart Zoom / Subtitle / 720P: 1280 x 720 Zoom / Dot to Dot / 16:9 / 4:3 1080I: 1920 x 1080 1080P: 1920 x 1080 PC.Mode Please check the display settings of your computer before connecting to the TV. If the display setting of your computer does not match the TV, there may be no video. Resolution Vertical.Frequency.(Hz) Aspect.Ratio 640 x 480 800 x 600 4:3 / 16:9 / Dot to Dot 1024 x 768 1360 x 768 1920 x 1080 HDMI.Mode. Resolution Vertical.Frequency.(Hz) Aspect.Ratio 480I: 1440 x 480 480P: 720 x 480 576I: 1440 x 576 576P: 720 x 576 Auto / Smart Zoom / Subtitle / 720P: 1280 x 720 Zoom / Dot to Dot / 16:9 / 4:3 1080I: 1920 x 1080 1080P: 1920 x 1080... -
Page 50: Specifications
Specifications .Specifications Model L26DIGB21 Panel.System 26 inch LCD Panel Display.Resolution 1920 pixels (horizontal) x 1080 pixels (vertical) Television.System PAL I / BG / DK SECAM L / BG / DK Brightness 400 cd/m Contrast.Ratio 800:1 Energy.Efficiency.Class Screen.Size.(measured.diagonally) Approx. 66 cm (26 inch) Power.Consumption.(In.HOME./. STANDBY.mode) Average.Annual.Energy.Consumption. 92kWh Standby.Power.Consumption 0.49W Operating.Temperature 0°C – 40°C Operating.Humidity 10% – 80% Mercury.Content.(mg) <100 mg Presence.of.Lead √ Reference.Period 2010/1062 – 2011 Power.Source 100-240V~ 50/60Hz Dimension.(W.x.D.x.H).with.base 660 x 215 x 500 mm Weight.(Net) 8.0 kg Inputs./.Output SCART. - Page 51 ENERG L26DIGB21 kWh/annum Watt inch - 2011 2010/1062 L26DIGB21_IB_111003_Annie.indd 51 11年10月3日 下午4:25...
-
Page 52: Safety.warnings
Safety.Warnings .Safety.Warnings • Read all the instructions carefully before using the unit Safety and keep them for future reference. • Always disconnect the unit from the mains supply before connecting / disconnecting other devices or • Retain the manual. If you pass the unit onto a third moving the unit. party make sure to include this manual. • Unplug the unit from the mains socket during a • Check that the voltage marked on the rating label lightning storm. matches your mains voltage. Mains.Cable. Damage • Make sure the unit or unit stand is not resting on top of • Please inspect the unit for damage after unpacking. the mains cable, as the weight of the unit may damage • Do not continue to operate the unit if you are in any the mains cable and create a safety hazard. doubt about it working normally, or if it is damaged • If the mains cable is damaged it must be replaced in any way - switch off, withdraw the mains plug and by the manufacturer, its service agent, or similarly consult your dealer. qualified persons in order to avoid a hazard. Location.of.Unit Interference • The unit must be placed on a flat stable surface and •... - Page 53 Standby. Service • The button on the remote control does not switch • To reduce the risk of electric shock, do not remove off the unit completely. The unit will continue to draw screws. The unit does not contain any user-serviceable electricity from the mains supply while in standby. In parts. Please leave all maintenance work to qualified the interests of safety and to avoid unnecessary energy personnel. consumption, never leave the unit in standby while • Do not open any fixed covers as this may expose unattended for long periods of time, e.g. overnight, dangerous voltages. while on holiday or while out of the house. Switch it off Maintenance and disconnect the mains plug from the mains socket. • Ensure to unplug the unit from the mains socket before Batteries cleaning. • Batteries used in the remote control for this unit • Do not use any type of abrasive pad or abrasive are easily swallowed by young children and this is cleaning solutions as these may damage the unit’s dangerous. surface. • Keep loose batteries away from young children and • Do not use liquids to clean the unit. make sure that the battery holder tray is secure in the remote control. Seek medical advice if you believe a cell has been swallowed. •...
- Page 54 If you require a replacement for any of the items listed below, please quote their corresponding part numbers: Replacement.Part Part.Number Base Stand 102C2611111 Remote Control 504C2436103 AAA Batteries 32200007158 Screws 209030427B1 Visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories. With over 1 million spares and accessories available we can deliver direct to your door the very next day. Visit www.partmaster.co.uk or call 0844 800 3456 (UK customers only). Calls charged at National Rate. This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU. For more information, please contact the local authority or your retailer where you purchased the product. Notes.for.battery.disposal The batteries used with this product contain chemicals that are harmful to the environment. To preserve our environment, dispose of used batteries according to your local laws or regulations. Do not dispose of batteries with normal household waste. For more information, please contact the local authority or your retailer where you purchased the product. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. The FREEVIEW word and logo are trademarks of DTV services Ltd and are used under licence. ©DTV Services Ltd 2002 The “HD Ready” logo is a trademark of DIGITALEUROPE. SRS TruSurround HD™ creates an immersive, feature-rich surround sound experience from two speakers, complete with rich bass, high frequency detail and clear dialogue. TruSurround HD, SRS and the symbol are trademarks of SRS Labs, Inc. All trademarks are the property of their respective owners and all rights are acknowledged. DSG Retail Ltd • Maylands Avenue • Hemel Hempstead Herts • HP2 7TG • England (P.N.: 4031C261259) L26DIGB21_IB_111003_Annie.indd 54 11年10月3日...
- Page 55 L26DIGB21_IB_111003_Annie.indd 55 11年10月3日 下午4:25...
- Page 56 L26DIGB21_IB_111003_Annie.indd 56 11年10月3日 下午4:25...