Cycle Settings And Options; Special Functions; Custom Program; Steam Functions - LG DLEY1701V Owner's Manual

34 now TOUSZ
Cycle Settings And Options (cont.)
Damp Dry Signal
With this option, the dryer will signal when the load
is approximately 80% dry. This allows you to remove
faster- drying lightweight items or items that you would
like to iron or hang while still slightly damp. Press the
Damp Dry Signal button to activate or deactivate Damp
Dry Signal.
Wrinkle Care
Selecting this option will tumble tile load periodically for
up to 3 hours after tile selected cycle, or until tile door is
opened, This is helpful in preventing wrinkles when you
are unable to remove items from tile dryer immediately,
Special Functions
The option buttons also activate special functions,
including Child Lock,. Press and hold the Rack Dry
button marked with the special function.
Child Lock
Use this option to prevent unwanted use of the dryer
or to keep cycle settings from being changed while the
dryer is operating. Press and hold the Rack Dry button
for 3 seconds to activate or deactivate the Child Lock
function.
The Child Lock icon will be shown in the display, and all
controls are disabled except the POWER button.
[i_ _NOTE "
nee set, Child Lock remains active until it is manually
eactivated. Child Lock must be turned offto run
nother cycle. To deactivate Child Lock, press and hold
e Rack Dry button for three seconds. J
Custom Program
If you have a special combination of settings that you
use frequently, you can save these settings as a Custom
Program..
To Save a Custom Program:
1. Turn on the dryer and press the Cycle Buttons to select
the desired cycle.
2. Use the cycle setting buttons to adjust the settings for
that cycle.
3. Press the cycle option button(s) for the option you
would like to add.
4. Press and hold the Custom PGM button for 3 seconds.
I! @ NOTE ]
u may save only one custom program at a time.
ressing and holding the Custom PGM button will
verwrite any previously saved custom program.
To Recall a Custom Program:
1. Turn on the dryer.
2. Press the Custom PGM button.
3. Press the START/PAUSE button to start the cycle.
Steam
Functions
LG's new steam technology allows you to inject fabrics
with a swirling jet of hot steam to refresh clothes, reduce
static, and make ironing easier.
Simply select the Steam Fresh
TM
cycle, or you can add a
steam option to selected cycles.
Using the Steam Fresh _ cycle
Steam Fresh
TM
uses the power of steam alone to quickly
reduce wrinkles and odor in fabrics. It brings new life to
wrinkled clothes that have been stored for an extended
time and makes heavily wrinkled clothes easier to iron.
Steam Fresh
TM
can also be used to help reduce odors in
fabrics.
Using the Wrinkle Free cycle
Use to remove wrinkles, including from loads left in the
dryer too long. This is helpful in preventing wrinkles
when you are unable to remove items from the dryer
immediately.
---!_ N OT E
If you will be on vacation or not using your dryer
or an extended period of time, you should turn off
he water supply to the dryer. This helps to avoid
unintended flooding (due to a water pressure surge)
hile you are away