Summary of Contents for IGS Audio RUBBER BANDS
- Page 1 RUBBER BANDS USER'S MANUAL IGS Audio Igor Sobczyk 3 Maja 76d, 41-400 Mysłowice, Poland e-mail: igs@o2.pl ph: +48 601 597 592 www.igsaudio.com...
- Page 2 The information in this document is subject to change without notice. IGS Audio makes no warranty of any kind with respect to the material in this document and shall not be liable for errors contained herein or for incidental or consequential damages related to the use of the material.
- Page 3 Always check the voltage selector on the PSU to ensure that it is set to the proper voltage available in your country. Connecting the PSU to the RUBBER BANDS is fairly easy, thanks to industrial standard 7-pin metal connector and long, heavy duty cable.
- Page 4 IGS AUDIO RUBBER BANDS – stereo tube equalizer The Rubber Bands EQ consists of two blocks: The first block is a classic passive filter well known from the EQP-1 Pultec equalizer. The second block is a specially designed two-stage tube amplifier called Organic Amp. The new design includes a bypass relay, which allows you to instantly compare the results of your work.
- Page 5 HIGH BOOST BASS CUT HIGH CUT Q FACTOR BASS BOOST BYPASS HIGH CUT HIGH BOOST BASS FREQ FREQ FREQ HIGH CUT Amount of attenuation of high frequencies HIGH BOOST Amount of boost of high frequencies BASS CUT Amount of attenuation of low frequencies BASS BOOST Amount of boost of low frequencies Q FACTOR Slope of the high boost filter HIGH CUT FREQ Frequency of high cut filter...
- Page 6 RUBBER BANDS main functions and technical specification: – passive equalizer with tube Organic Amp – XLR, transformer balanced inputs/outputs, – Smooth control: Bass Boost; Bass Cut; High Boost Q; High Boost; High Cut, – Stepped frequency control for all bands, –...
- Page 7 Operating Level +4 dBu Maximum Input +18 dBu Maximum Output +22 dBu EQ boost/cut range 15 dB Input impedance 10 kOhm Output Impedance 600 Ohm Frequency response 20Hz to 20kHz; +/- 0.1dB Band amplification +/-15 dB Bandwidth Range (Q) 0.4 to 5 Signal to Noise Ratio dBA 81 dB Crosstalk @ 20Hz - 20kHz...
- Page 8 Warranty: This device is declared to be free from defects in material and workmanship for a period of three years. Any device found defective within three years from the delivery date and returned to the factory, will be repaired, adjusted, or replaced and sent to the customer with no charge.
Need help?
Do you have a question about the RUBBER BANDS and is the answer not in the manual?
Questions and answers