Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Kestrel Drop
Summary of Contents for Kestrel Drop
-
Page 1: Getting Started
Getting Started Please visit www.nkhome.com/kestrel/DROP for more information. -
Page 2: Table Of Contents
Table of Contents Getting Started with Your Kestrel DROP Changing App Settings Connecting to an iOS Device Getting Data Logs Off iOS Device Battery Replacement LED Indicators Getting More from Your DROP Glossary of Measurements Please visit www.nkhome.com/kestrel/DROP for more information. -
Page 3: Getting Started With Your Kestrel Drop
Getting Started with Your Kestrel Drop Please note: You will need to remove the battery tab prior to using the DROP (see Battery section for opening battery case). Please remove tab prior to operation. Overview Temperature Sensor Humidity Sensor LED Location... -
Page 4: Changing App Settings
• Manage Connection (i.e., Change app closed) Refresh Rate) • Manage Logging (i.e., Change Data Logging Rate) • Manage Alerts • Disconnect • Forget Device • LED Flash • Factory Reset • Device Manual • Device Info Please visit www.nkhome.com/kestrel/DROP for more information. -
Page 5: Connecting To An Ios Device
Connecting to an iOS Device • Please see: www.nkhome.com/pdfs/Kestrel_Connect_Instructions.pdf • All data logged by the DROP since your last connection will automatically download to your iOS device upon your next connection. MUST BE IN RANGE TO: • Upload DROP Data •... -
Page 6: Getting Data Logs Off Ios Device
There are two ways to export data off your iOS device: • Directly from the Stats Page or • Manage Logging from the Manage Page You would then export to a valid email address or using AirDrop. Please visit www.nkhome.com/kestrel/DROP for more information. -
Page 7: Battery Replacement
Battery Replacement (Please note: After battery replacement, you MUST reconnect to the Kestrel Connect application to ensure time and date are updated for logging purposes.) Figure 2: Battery Replacement Unit is on. (Only powers off if battery is removed) If Battery Is Inserted Bluetooth is on. -
Page 8: Getting More From Your Drop
• After submersion in a liquid, humidity readings, if available on your DROP, will be impacted until the humidity sensor area has fully dried. Gently blowing on the sensor area (the small grid of holes in the front case) can speed this process. -
Page 9: Glossary Of Measurements
Dewpoint: the atmosphere begins to condense. Any further cooling causes condensation (fog and dew). This is also the temperature of saturation at which the dry-bulb, wet-bulb and dew-point temperatures are all the same. 321006_1_15.03.13 Please visit www.nkhome.com/kestrel/DROP for more information.