Operation - Elis DETA AP-20 User Manual

7. Operation

7.1. Switch on the device, by pressing and holding it for 3
seconds (protection against accidental operation) before mov-
ing to the treatment program selection mode. A single audible
signal should sound. The display will read: the name of the pro-
gram in the top row, and the bottom line will contain the num-
ber of a program, the program time in hours:minutes:seconds,
and the battery indicator. No. 1 00:20:00...( ).
7.2. After switching on the operating mode, the device switches
to "Select Program". If no programs have been selected within
30 seconds, the device switches off . Programs are selected by
clicking on the arrows or , to navigate through the list of
programs. allows you to navigate through the list in a circle.
moves the arrow through the list from top to bottom.
7.3. To start the program, press . The device will count down
in reverse order. The countdown to zero will switch off auto-
matically.
7.4. You can stop the program by pressing button . The pro-
gram stops and the device switches to "Select Program".
Pressing again restarts the program.
7.5. For the device to take eff ect, place the device with the keys
facing away from you at a distance of not more than 0.5 m. The
emitting antenna is located on the back of the device. The de-
vice can be placed in your breast pocket.
7.6. To switch the instrument off , press button and hold
for 2 seconds until the audible signal. The off delay was espe-
cially designed so the device is not switched off by accident in
a pocket.
7