Gigabyte GA·7VRX User Manual page 108

GA-7VRX/GA-7VRXP Motherboard
(3) Press "Enter" to enter "BIOS FEATURES SETUP" menu. Use the arrows to highlight the item
"1st Boot Device", and then use the "Page Up" or "Page Down" keys to select "Floppy".
( C ) 2001 American Megatrends, Inc. All Rights Reserved
1st Boot Device
2nd Boot Device
3rd Boot Device
S.M.A.R.T. for Hard Disks
BootUp Num-Lock
Floppy Drive Seek
Password Check
(4) Press "ESC" to go back to previous screen. Use the arrows to highlight the item "SAVE & EXIT
SETUP" then press "Enter". System will ask "SAVE to CMOS and EXIT (Y/N)?" Press "Y"
and "Enter" keys to confirm. Now the system will reboot automatically, the new BIOS setting
will be taken effect next boot-up.
STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
PNP / PCI CONFIGURATION
LOAD BIOS DEFAULTS
LOAD SETUP DEFAULTS
ESC: Quit ????? : Select Item
F6: Load BIOS Defaults
AMIBIOS SETUP - BIOS FEATURES SETUP
: Floppy
: IDE-0
: CDROM
: Disabled
: On
: Disabled
: Setup
AMIBIOS SIMPLE SETUP UTILITY - VERSION 1.24b
(C) 2001 American Megatrends, Inc. All Rights Reserved
Save to CMOS and EXIT (Y/N)? Y
(Shift)F2 : Change Color
F7: Load Setup Defaults
Save Data to CMOS & Exit SETUP
ESC: Quit
F1 : Help
F5 : Old Values (Shift)F2: Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
INTEGRATED PERIPHERALS
HARDWARE MONITOR & MISC SETUP
SUPERVISOR PASSWORD
USER PASSWORD
IDE HDD AUTO DETECTION
SAVE & EXIT SETUP
EXIT WITHOUT SAVING
F10:Save & Exit
110
????: Select Item
PU/PD/+/- : Modify
F5: Old Values