Specifications; General Safety Rules - Makita TW0200 Instruction Manual

SPECIFICATIONS

Capacities
Square drive
No load speed (RPM)
Impacts per minute
Max. fastening torque
Overall length
• Manufacturer reserves the right to change specifications without notice.
• Specifications may differ from country to country.

GENERAL SAFETY RULES

(For All Tools)
WARNING:
Read and understand all instructions. Failure to follow all
instructions listed below, may result in electric shock, fire and/or
serious personal injury.
SAVE THESE INSTRUCTIONS
Work Area
1. Keep your work area clean and well lit.
Cluttered benches and dark areas invite acci-
dents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power
tools create sparks which may ignite the dust
or fumes.
2
Model
Standard bolt
High tensile bolt
Net weight
TW0200
M10 - M16 (3/8" - 5/8")
M10 - M12 (3/8" - 1/2")
12.7 mm (1/2")
0-2,200/min
200 N.m (150ft•lbs)
251 mm (9-7/8")
2.1 kg (4.6lbs)
3. Keep bystanders, children, and visitors
away while operating a power tool. Dis-
tractions can cause you to lose control.
Electrical Safety
4. Double insulated tools are equipped with
a polarized plug (one blade is wider than
the other.) This plug will fit in a polarized
outlet only one way. If the plug does not fit
fully in the outlet, reverse the plug. If it
0-2,200
USA002-2