Auto Profile Selection Management - Maxnet WP 8800 - 1N User Manual

3.2.7 Auto Profile Selection Management

The auto selection feature allows the adapter to automatically select a profile from the list of
profiles and use it to connect to the network. To add a new profile into the Auto Selected Profiles
list, please follow these steps.
1. On the Profile Management screen (shown in
2. The Auto Profiles Selection management window will appear (shown in
of all created profiles in the Available Profiles.
3. Highlight the profiles to add to auto profile selection, and click Add. The profile will appear in
the Auto Selected Profiles box.
4. Highlight a profile in the Auto Selected Profiles box.
5. Click Move Up or Move Down as appropriate.

Note:
The first profile in the Auto Selected Profiles box has highest priority, while the last profile has the
lowest priority.
6. Click OK.
7. Check the Auto Select Profiles checkbox on the Profile Management tab (shown in
3-2).
WP 8800 – 1N 150Mbps Wireless N-Lite PCI-E Adapter
F igure 3-2
X
Figure 3-11
22
) , click Order Profiles....
X
F igure 3-11) with a list
X
F igure
X