Download Print this page
iFIT EXIF09 INT.0 User Manual

iFIT EXIF09 INT.0 User Manual

Ifit module

Advertisement

Quick Links

User's Manual
Congratulations for selecting the revolutionary iFit
Your iFit Module will help you to create and manage a personal
fitness program designed to make your fitness goals a reality.
QUESTIONS?
If you have questions after reading this manual and configuring
your iFit Module, PLEASE DO NOT CONTACT THE STORE.
Please go to support@iFit.com, send an e-mail to
csuk@iconeurope.com, call 0330 123 1045, or write to the
address below:
ICON Health & Fitness, Ltd.
Unit 1D, The Gateway
Fryers Way, Silkwood Park
OSSETT
WF5 9TJ
UNITED KINGDOM
HOW TO CONFIGURE YOUR IFIT MODULE
Follow the steps below to configure your iFit Module.
IMPORTANT: To complete the configuration process, you will
need to know your network SSID (network name), network
encryption type, and network password.
1. Plug the included USB cable into the port on your iFit Module.
Plug the other end of the USB cable into a USB port on your
computer.
2. Turn on your computer, launch your Web browser, and go to
www.iFit.com/install.
3. Follow the instructions on your computer screen. When you
have completed the process, the words, "Device has been suc-
cessfully configured" will be displayed on your computer screen.
4. Unplug the USB cable from your computer and from your iFit
Module.
5. Unplug the power cord of your fitness equipment. Insert the iFit
Module into the iFit port on the console of your fitness
equipment.
Note: If you have questions after following these instructions, go to
www.iFit.com/support for assistance. To use the iFit Module, see
your fitness equipment user's manual or go to www.iFit.com/support.
OPERATING REQUIREMENTS
Module.
®
To configure and use your iFit Module, you will need the following:
• A PC or Macintosh computer with a USB port
• A wireless 802.11b router with SSID broadcast enabled (hidden
networks are not supported)
• An Internet connection (a broadband connection is
recommended; performance depends on connection speed)
• An iFit.com membership
Note: The iFit Module supports unsecured and secured (WEP,
WPA™, and WPA2™) encryption.
1
5
Model No.
EXIF09-INT.0
USB
Cable
iFit
Module
iFit
Module

Advertisement

loading
Need help?

Need help?

Do you have a question about the EXIF09 INT.0 and is the answer not in the manual?

Questions and answers

Summary of Contents for iFIT EXIF09 INT.0

  • Page 1 SSID (network name), network encryption type, and network password. 1. Plug the included USB cable into the port on your iFit Module. Plug the other end of the USB cable into a USB port on your computer.
  • Page 2: Limited Warranty

    IMPORTANT NOTICE IMPORTANT: To satisfy exposure compliance requirements, the antenna and transmitter in the iFit module must be at least 8 in. (20 cm) from all persons and must not be near or connected to any other antenna or transmitter.