Sound Magus H500 Owner's Manual

Sound Magus H500 Owner's Manual

5 channel hybrid car amplifier

Advertisement

5-CH
H500
Hybrid
Car Amplifier
OWNERS MANUAL
5-CH Hybrid Car Amplifier

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the H500 and is the answer not in the manual?

Questions and answers

Summary of Contents for Sound Magus H500

  • Page 1 5-CH H500 Hybrid Car Amplifier OWNERS MANUAL 5-CH Hybrid Car Amplifier...
  • Page 2 INTRODUCTION Congratulations! Thank you for purchasing SOUNDMAGUS 5- CH Hybrid Car Amplifier for your car audio system. Now you own an amplifier of uncompromising design engineering incorporating latest advanced circuit technology. You will soon discover the amplifier displays optimum sound high quality and reliable performance.
  • Page 3: Design Features

    DESIGN FEATURES Class-D + Class-AB Hybr id desi gn, Best conbi nation of strong bass and Hi-Fi performance . High quality SMD components, high accurate resistors and capacitors Double side FR-4 PCB Full MOSFET power circuit design Super noise rejection circuit Adjustable High pass, Low pass, Subsonic filters.
  • Page 4: Amplifier Functions

    AMPLIFIER FUNCTIONS...
  • Page 5 Speaker connection Connect your speakers correctly which means plus to plus and minus to minus. Never connect speaker cables with chassis ground directly. It may destroy your amplifier. We recommend AWG 16# speaker cable. The detailed connection ways are shown in page 7-8. 2 +12V Battery Terminal The +12 Volt power cable must be connected with a fuse in line near the battery+ terminal.
  • Page 6: Subsonic Filter

    8 SUBSONIC Filter The subsonic filter can filter out unwanted low frequency from 10Hz(OFF)to 50Hz. This function will increase the power handling of your woofers. 9 Low Pass Filter Filter out high frequency from 50~200Hz that the woofer can't play.Adjust this knob to match the woofer's frequency response.
  • Page 7: Pre-Installation

    PRE-INSTALLATION Use good insulated 4# (or up) power cable. The +12Volt power cable must be connected with a 80A fuse in line fuse near 20cm of battery+ terminal. Please use car audio RCA cables, otherwise it may be disturbed. Keep these cables as short as possible.
  • Page 8: Wiring Configuration

    WIRING CONFIGURATION...
  • Page 10: Troubleshooting

    TROUBLE SHOOTING MALFUNCTION SOLUTION Check connetions both at amplifier and at other ends Check plus and minus battery cables Power LED off Check all fuses on amplifier Check remote voltage Check volume control on the source unit Check GAIN regulator on amplifier No Output (Power LED on) Check RCA cables and connections...
  • Page 11: Specification

    SPECIFICATION 4×120W + 500W RMS@2Ω(Power supplier14.4V) 4×90W + 300W RMS@4Ω(Power supplier14.4V) Ω 2×200W + 300W RMS@4 Bridged power supplier 14.4V) Input Level 0.2V-5V 4x channel Frequency Response 20Hz-25KHz 4x channel HPF Frequency 20Hz-200Hz Subwoofer Channel frequency response 8Hz-200Hz Subsonic Filter Frequency 8Hz-50Hz LPF frequency 40Hz-200Hz...
  • Page 12 5-CH Hybrid Car Amplifier Manufacturer: Soundmagus Technology Co.,Ltd Website: www.soundmagus.com...

Table of Contents

Save PDF