Table of Contents
Advertisement
CARE AND MAINTENANCE
WARNING: Before performing any maintenance task, unplug the unit, and allow it to cool completely .
1 .
To keep the heater clean, clean the outer shell with a soft, damp cloth . Use a mild detergent if
necessary . After cleaning, dry the unit with a soft cloth .
CAUTION: DO NOT let liquid enter the heater .
2 .
DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the
heater . This may cause damage or deterioration to the surface of the heater .
3 .
DO NOT immerse the heater in water .
4 .
Wait until the unit is completely dry before use .
5 .
If you will not be using the heater for a while, take the batteries out of the remote control and store
for future use .
6 .
Store the heater in a cool, dry location when not in use . To prevent dust and dirt build-up, use the
original packaging to repack the unit .
CHANGING THE MEDIA INSERT - Hardware Requirements: Phillips screwdriver
1 .
To replace or change the media inserts, with the heater unplugged first remove the glass panel
(1) by removing the two screws holding the glass in place . Remove and replace the media set by
gently lifting up on the log set .
2 .
Replace with desired media glass, rocks, or logs and reinstall the glass panel (1) . (Alternate media
not included)
ADJUSTING THE DECORATIVE GLASS SHELF
1 .
To adjust the decorative glass shelf, with the heater unplugged, first remove the glass panel (1) by
gently lifting up . Place the decorative glass shelf upside down on a soft surface to prevent breaking
or scratching . Remove and replace the existing metal extensions (2) and replace with desired
height extension as provided .
2 .
Replace the decorative glass shelf (1) by placing it directly onto the aligned pegs mounted to the
top of the fireplace .
1
1
13
2
2
Advertisement
Table of Contents
