Cadillac ATS Owner's Manual page 183

182 Infotainment System
To play a USB device:
Connect the USB.
Press the MEDIA button on the
faceplate until the connected
device is shown.
While the USB source is active, use
the icons on the screen to operate
the USB:
(Seek Previous/Fast
Reverse)
(Seek Next/Fast Forward)
/ (Play/Pause)
Z
(Shuffle)
For information on how to use the
screen icons, see Playing an
Audio CD.
USB Menu
Press the MENU knob to display the
USB menu and the following may
display:
Browse : Select to display the files
and folders on the USB device.
Tone Settings : Select to adjust
Bass, Midrange, Treble, Balance,
Fade, and EQ (Equalizer). See
Tone Settings under Playing an
Audio CD.
Auto Volume : If equipped, see
Playing an Audio CD.
®
Bose AudioPilot : If equipped,
this feature can be turned on or off.
® ®
See Bose AudioPilot
Radio 0 174.
EQ (Equalizer) Settings :
If equipped, this feature adjusts the
pre-defined EQ modes. See EQ
(Equalizer) Settings in AM-FM
Radio 0 174.
DSP Modes : If equipped with a
®
Bose Surround Sound System, this
feature adjusts the DSP modes.
See DSP Modes in AM-FM Radio
0 174.
®
Playing from an iPod
This feature supports the following
iPod models:
®
iPod nano (1st, 2nd, 3rd, and
4th generation)
iPod with video (5.0 and 5.5)
iPod classic
iPod touch
generation)
There may be problems with
operation and function in the
following situations:
When connecting an iPod on
which a more recent version of
the firmware is installed than is
in AM-FM
supported by the infotainment
system.
When connecting an iPod on
which firmware from other
providers is installed.
To connect and control an iPod:
1. Connect one end of the
standard iPod USB cable to the
iPod's dock connector.
2. Connect the other end to a
USB port in the center console
or in the center stack
storage bin.
3. Press the MEDIA button to
select the source.
®
(6th generation)
®
(1st and 2nd