Advertisement
Quick Links
Advertisement
Summary of Contents for Pure Power Tools 10.8V Li-ION Multi-tool
- Page 1 10.8V Li-ION Multi-tool Original Instructions Read instructions before operating this tool.
- Page 2 Important Information Declare that the product 12 Month Limited Warranty Part numbers: PUREMULTI17 General Safety Rules Pure 10.8V Li-ION Multi-tool Additional Specific Safety Rules Complies with the essential requirements of the following European Directives: Labels and Symbols 2006/42/EC – Machine Directive Machine Overview 2006/95/EC –...
- Page 3 10.8V Li-ION Multi-tool Power Tools. Evolution Power Tools IMPORTANT reserves the right to optionally repair or Please read these operating and safety replace it with the same or equivalent item. instructions carefully completely. There is no warranty – written or verbal – for For your own safety, before using this cutting/scraping blades.
- Page 4 5. Store idle tools. When not in use, tools 15. Disconnect tools. Disconnect tools from should be stored in a dry locked-up place, the power supply when not in use, before out of children’s reach. maintenance operation when 6. Never force the tools. Your tools will be changing accessories such as blades, bits, more efficient and safer when used at the cutters, etc.
- Page 5 10.8V Li-ION Multi-tool 6. Under extreme conditions electrolyte HEALTH ADVICE may be leak from the battery. If contact Warning! accidentally occurs, flush your skin with water. If electrolyte contacts your eyes, When drilling, sanding, sawing or grinding, additionally seek medical help. Electrolyte dust particles will be produced.
- Page 6 16. Always wear appropriate safety glasses when using this machine. Every day glasses are NOT safety glasses. WARNING This machine is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the safe use of the machine by a person responsible for their...
- Page 7 10.8V Li-ION Multi-tool Annotated photograph of Multi-Tool 1. SCRAPER BLADE 2. CUTTING BLADE 3. DETAIL SANDING ATTACHMENT 4. HANDLE 5. ON/OFF SLIDE SWITCH 6. SPINDLE 7. INSERTED BATTERY PACK 8. BATTERY PACK LOCKING TAB...
- Page 8 SPECIFICATION OPERATING INSTRUCTIONS Note: Before using this tool, read the instruction manual carefully. PURE MULTI-TOOL Voltage: 10.8V-DC BEFORE USE No Load Speed: 17000 - A Battery Pack must be inserted into the - oscillations per minute tool as detailed below. It is important that the Battery Pack is of the designated type recommended for this machine.
- Page 9 10.8V Li-ION Multi-tool 3. INSTALLING/REMOVING 5. APPLICATION ACCESSORIES This is a versatile tool which will be of use Before mounting any attachments, make in many applications. Your Multi-Purpose sure that the battery pack is removed from Tool can be used for sanding, and sawing the machine to avoid the risk of accidental wooden materials, plastic and plaster.
- Page 10 Notes...
- Page 11 10.8V Li-ION Multi-tool Notes...
Need help?
Do you have a question about the 10.8V Li-ION Multi-tool and is the answer not in the manual?
Questions and answers