Cobra AirWave CWA BT 160E Quick Start Manual

TM
What's in the Box
CWA BT 160E

Quick Start Guide

Setting Up Cobra AirWave
Works with any Bluetooth
® -Enabled Device
1. Connect one 3.5mm end of the
Thank you for purchasing the Cobra AirWave Wireless
™
Music Receiver.
Cobra AirWave
™ lets you...
2. Connect the other end (3.5mm or
• Play music or audio from any media device enabled
with Bluetooth ® wireless technology through your
home stereo, car stereo or docking station.
• Control your music directly from your media device.
3. Connect the micro-USB adapter
• Connect any Bluetooth ® media device such as a phone,
tablet, laptop, etc.
• Stay connected virtually anywhere in your home with a
Bluetooth ® wireless range of 33 feet. 4. The blue LED light will flash to indicate the unit is powered
Cobra AirWave
™
Bluetooth ® Receiver
3.5mm-3.5mm 3.5mm-RCA
Micro-USB Cable
Stereo Cable Stereo Cable
for Charging
™
included audio cable to the head-
phone jack of the Cobra AirWave .
™
2xRCA) to an audio input on your
home stereo system, car stereo or
other speaker.
cable to the Cobra AirWave ™ and plug into a USB-com-
patible power port. Slide power switch from OFF to ON.
and is now ready to be paired to your media device.
Pairing Your Cobra AirWave
™
In order to pair the Cobra AirWave to your media device,
™
press and hold the blue lighted button on Cobra AirWave ™
for 3 seconds to put it into pairing mode. Go to the Blue-
tooth Settings Menu on your media device. For most
®
devices this is found by pressing Settings u Bluetooth
® .
Press Scan for Devices and/or wait for the device list to
populate and then select Cobra AirWave .
™
Pairing can take up to 30 seconds. If you are prompted
to "Accept password to pair" press Confirm. When
Cobra AirWave is properly paired and connected,
™
"Connected" will be shown on your media device.
When the Cobra AirWave is properly paired and con-
™
nected to your device the LED on the top of the unit will
shine blue.
For more information on pairing with Bluetooth devices
®
consult your device's owners manual.
Your Cobra AirWave is now connected and ready to play
™
music! Just play music on your device as you normally
would and the sound will come out of your speakers!
Keep in mind that the Cobra AirWave
™ has a
33-foot range.
Reconnecting Your Device
If you move out of range or turn off the Bluetooth ® feature
on your device, the Cobra AirWave will disconnect from
™
your device. To reconnect, simply access the Bluetooth
®
settings on your device and select the Cobra AirWave ™
device listed.
Changing Connected Devices
If you want to switch from one device to another:
1. End the existing Bluetooth connection with the
®
connected device by turning off the Bluetooth
®
function of the device.
2. The Cobra AirWave ™ can now be connected to a
different media device. Follow the instructions in "Pairing
Your Cobra AirWave" for new media devices, or connect
to Cobra AirWave ™ via the media device's Bluetooth ®
manager for previously paired devices.
NOTE: When connected, press the top button on the Cobra
AirWave ™ to play and pause your music or other media.
Out of Range or Lost Signal
If the media device is out of range (beyond 33 feet) of the
Cobra AirWave or if there is something blocking the
™
Bluetooth ® signal, the blue LED light will flash to indicate
that the Bluetooth
® connection with the media device has
been lost. To avoid a lost connection:
1. Move the media device back into range (within 33
feet), and/or make sure there's a clear line of sight and
that there are no obstructions between the receiver
and the media device.
2. Within 15 seconds, the connection will automatically
be re-established and the blue LED light will turn on.
3. If the connection is lost for more than 45 minutes,
the connection will need to be re-established.
Follow the directions in "Reconnecting Your
Device".