GE JCBP79 Owner's Manual And Installation Instructions page 41

Problem Possible Causes
Clock and timer Plug on range is not completely • Make sure electrical plug is plugged into a live, properly
do not work
inserted in the electrical outlet.
A fuse in your home
may be blown or the
circuit breaker tripped.
Oven controls improperly set. • See the Using the clock and timer section.
Oven will not self-clean
The oven temperature is
too high to set a self-clean
operation.
Oven controls improperly set.
The probe is plugged into
the outlet in the oven.
(on some models)
"Crackling" or
This is the sound of the
"popping" sound
metal heating and cooling
during both the cooking and
cleaning functions.
Excessive smoking
Excessive soil.
during a clean cycle
Oven door will not
Oven too hot.
open after a clean cycle
Oven not clean after a Oven controls not properly set. • See the Using the self-cleaning oven section.
clean cycle
Oven was heavily soiled.
"LOCK DOOR" flashes The self-clean cycle has been • Close the oven door.
in the display
selected but the door is not
closed.
"LOCKED" light is
The oven door is locked
on when you want
because the temperature
to cook
inside the oven has not
dropped below the
locking temperature.
"F—and a number You have a function error code. • Touch the OFF pad. Try reactivating the controls.
in the display
If the function code repeats.
Loc On appears in the
The oven controls have
oven display
been locked.
Control signals after You forgot to enter a
entering cooking time bake temperature or
or start time cleaning time.
What To Do
grounded outlet.
• Replace the fuse or reset the circuit breaker.
• Allow the range to cool and reset the controls.
• See the Using the self-cleaning oven section.
• Remove the probe from the oven.
• This is normal.
• Touch the OFF pad. Open the windows to
rid the room of smoke. Wait until the LOCKED light
goes off. Wipe up the excess soil and reset the
cleancycle.
• Allow the oven to cool below locking temperature.
• Clean up heavy spillovers before starting the clean
cycle. Heavily soiled ovens may need to self-clean
again or for a longer period of time.
• Touch the OFF pad. Allow the oven to cool.
• Disconnect all power to the range for at least
30 seconds and then reconnect power. If the
function error code repeats, call for service.
• See the Oven lockout section to unlock.
• Touch the BAKE pad and desired temperature or
the CLEAN pad and desired clean time.
www.GEAppliances.ca
41