Emotiva Little Ego User Manual page 5

Using Little Ego With Your Apple Computer
Apple computers already have the drivers they need to use
your Little Ego. All you need to do is to tell your computer to
use your Little Ego as its sound card. Once you do that, your
computer will usually play through your Little Ego when
it's plugged in, and play through its internal speakers when
your Little Ego is unplugged.
To tell your Apple computer to use Little Ego:
• Connect your Little Ego to a USB port on your
Apple computer.
• Open the Finder - from the dock.
• Select Applications.
• Double click on Utilities.
• Double click on Audio MIDI Setup.
• Click on Emotiva Little Ego on the left to select it.
• Click on the little gear (on the bottom left).
• Click Use This Device For Sound Output to set the Little Ego
as your default sound device.
• Click on the red dot to Exit Utilities and Audio MIDI Setup.
Note: Your Little Ego has a special driverless mode for
Windows computers. If you hold the Filter Select Switch
while plugging in your Little Ego you'll end up in this
mode; and the USB Mode Selector will light up red. If this
happens, it may confuse your Apple computer. If that
happens, just unplug your Little Ego and plug it back in.