Osg Commander Includes; Repair Kit Includes; Items Needed; Set Up - Step 1 - Inflate To Soft Pressure - Outcast OSG Commander Owner's Manual

OSG Commander Includes:

a: 1 - OSG Commander
b: 2 - 4' 2 Piece Oars
c: 1 - Seat
d: 1 - LCS Stripping Apron
e: 1 - Repair Kit

Repair Kit Includes:

f: 1 - Black PVC
g: 1 - Olive PVC
h: 1 - Grey PVC
i: 2 - Urethane
j: 1 - Urethane Coated Nylon
k: 1 - Vinyl Tube Valve Adapter
l: 1 - Summit 2 Valve Adapter
m: 3 - Type A Patches
n: 2 - Alcohol Prep Pads
o: 4 - Screws (Important! see Step 6)
p: 1 - Summit II Valve Wrench
q: 1 - Sand Paper

Items Needed:

Pump
Set Up - Step 1 - Inflate to Soft Pressure:
Items Needed:
1 - OSG Commander
1 - Vinyl Tube Valve Adapter
1 - Summit 2 Valve Adapter
1 - Pump (not included)
1. Remove the dust cap from the valve.
2. Push and turn the valve stem 1/4 turn to the left. This
positions the valve stem in the up or closed position. Having the
valve stem in the closed position allows air to be pumped into the chamber and will prevent the air from escaping.
3. Connect the clear vinyl valve adapter to the pump hose and to the Summit 2 valve adapter.
4. Insert the Summit 2 valve adapter into the valve on the boat. A 1/4 turn to the right will lock the adapter to the valve.
5. Inflate the chamber to a soft pressure.
6. Repeat procedure for all chambers.
b
e
f
k
g
l
m
n
h
www.outcastboats.com
a
c
d
i
p
o
~ 800-966-0976
q
j