TP-Link TX-VG1530 User Manual page 37

 Get IP Unicast: This is disabled by default. The minority of DHCP Server of ISP will not
support to enable this. When the route is connected right but IP cannot get, you can select this
box.
 Set DNS Server manually: Choose "Set DNS Server manually", you can set DNS Server
manually here. The GPON router will use this DNS Server for priority.
 Host Name: Here displays model No. of your GPON router.
Click the Save button to save the settings.
4.4.1.3 PPPoE
If your ISP provides a PPPoE connection and you need to use an ATM Interface, choose PPPoE
in the drop-down list, and then the screen will be displayed as below.
PPP Username/Password/Confirm Password: Enter the User Name, Password and

Confirm Password provided by your ISP. These fields are case-sensitive.
Authentication Method: Select the Authentication Method from the drop-down list, the

default method is AUTO_AUTH, and you can leave it as a default setting.
TX-VG1530 N300 Wireless VoIP GPON Router User Guide
Figure 4-12
27