GVA GVA3 Instruction Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

STEAM MOP

GVA3

Instruction Manual

Table of Contents

Need help?

Do you have a question about the GVA3 and is the answer not in the manual?

Questions and answers

Summary of Contents for GVA GVA3

Page 1 STEAM MOP GVA3 Instruction Manual...
Page 2: After Sales Support
Distributed By: M.E.W (Australia) Pty Ltd 15 Vaughan Street Essendon Fields, VIC 3041 ACN 152 719 036 www.gvaproducts.com.au After Sales Support AUS: 1300 886 649 Technical Specification Voltage: 220-240V Wattage: 1500W Water tank capacity: 400ml Cord length: 5.5m Weight: 2.5kg Subject to technical change without notice.
Page 3: Machine Overview
Machine Overview 1. Handle Unit 2. Upper cord clip 3. Lower cord clip 4. Power cord 5. Clean water tank 6. LED indicator a) Water heating/power on (orange LED) b) Steam ready (orange LED) (green LED) 7. Floor head 8. Steam release trigger 9.
Page 4: General Safety Information
General Safety Information close a door on the cord or pull the cord FOR HOUSEHOLD USE ONLY. around sharp edges or corners. Do not run When using the steam cleaner, basic safety the steam cleaner over the cord. Keep the precautions should always be observed, cord away from heated surfaces.
Page 5 General Safety Information 26. Store the steam cleaner in a cool, dry area. WARNING: Always switch off and unplug the steam cleaner from the electrical outlet before 27. Do not use an extension cord with this product. assembling, opening or emptying the water 28.
Page 6: Operation
Operation Assembling your steam cleaner Push handle into Screw handle in place. Attach microfibre pad main body. to floor head. Before you begin cleaning IMPORTANT: Please refer to floor manufacturer’s care recommendations before use and test the steamer on a discrete area of flooring to begin with. WARNING: To reduce the risk of personal injury, unplug the steamer when assembling the unit.
Page 7 Operation Before you begin cleaning Orange LED will illuminate when the unit is switched on at the plug and water is heating. B After approximately 1 minute the green LED will also illuminate showing steamer is ready to use. The green LED will go off when unit water is re-heating.
Page 8: Steam Cleaning Hard Floors
Operation Steam cleaning hard floors IMPORTANT: Please refer to floor manufacturer’s care recommendations before use and test the steamer on a discrete area of flooring to begin with. WARNING: Never leave the stick steam cleaner in one spot on any surface for an extended period of time with a damp or wet microfibre cleaning pad attached as this may damage the floor surface.
Page 9: Refreshing Carpets
Operation Refreshing carpets IMPORTANT: When using on carpets, always ensure the microfibre cleaning pad is properly attached to the floor head. Attach carpet glider To recline the unit place To produce steam Move the stick attachment to floor foot on floor head and squeeze the trigger.
Page 10: Maintenance
Maintenance Empty the water tank IMPORTANT: Allow the unit to fully cool down before performing any maintenance or troubleshooting checks. Remove the clean Twist the cap anti- Empty any excess water tank. clockwise to remove. water over the sink, replace water cap and return to the unit.
Page 11: Replacing The Hard Water Filter
Maintenance Cleaning the microfibre cleaning pad IMPORTANT: Never use bleach or fabric softener when washing the microfibre cleaning pad. 1 Machine washable at max temperature 40°C. Always use a mild detergent. 2 Leave the pad to dry for 24 hours. Replacing the hard water filter IMPORTANT:: Allow the unit to cool down fully before performing maintenance or troubleshooting checks.