Advertisement
Acoustic Density X10 User Manual
4. Quick Setup
With the passive B15 bass speaker is easy to setup a fast, high-quality sound system. To power one
piece of B15 speaker it is recommended to use an amplifier with a power of 750W/channel @Ω.
For an easy and quick installation, please consult the following steps and guides.
Connecting Speakers
The B15 is equipped with 4-point Speakon ® connectors allowing connection through audio cables
that use Speakon ® connectors at least at one end.
Connecting
Step 1: Insert the wired speakon connector into the speakon socket found on the bottom back side of
the speaker.
Step 2: Turn the wired speakon connector to the right until you will hear a click.
Step 3: Connect the other end of the cables with an appropriate amplifier.
Disconnecting:
Step 1: Using the thumb, pull the safety button placed on the connector
Step 2: Turn the connector to the left and pull it out.
Advertisement
