Table of Contents
Advertisement
Safety first!
•
NEVER attempt to move the urn when it is full of hot water!
•
DO NOT site the urn when it can be knocked off the counter top or where
someone could lean on the tap accidentally.
•
ALWAYS sit the urn on a surface that can withstand the weight of the urn and
the water in it. For 8L models that's around 11kg. For 26L models that's around
31kg!
•
DO NOT leave the urn switched on overnight if it is not in use. It wastes energy
and the urn could boil dry, which can damage the element.
•
DO NOT operate the urn without the lid securely fastened.
Boil Dry Protection Switch
If the urn boils dry, it is equipped with a cut-off switch. This needs to be reset manually
before the urn can be used again. The reset switch is underneath the urn. To operate:
1. Switch off the urn and unplug from mains.
2. Allow to cool FULLY.
3. Empty out the water.
4. Press the reset switch.
5. Refill the urn according to above instructions
6. Connect to mains supply.
Descaling
Excessive limescale build-up can cause the element to overheat and can even cause
the tap to malfunction! Make regular checks of the inside of the urn for signs of
limescale. It is essential that limescale deposits be cleaned using proprietary descaling
tablets, powders or liquids (available from most supermarkets). Those in hard water
areas may need to descale the urn every week. Those in soft water areas won't need
to descale the urn quite as often.
For a heavily scaled urn use approximately FOUR TIMES the amount of descaling
product required for a kettle. Repeat if necessary.
YOUR WARRANTY DOES NOT COVER MALFUNCTIONS CAUSED BY EXCESSIVE
LIMESCALE BUILD UP.
instructions.indd 5
TIPS & TROUBLESHOOTING
5
02/06/2014 14:50
Advertisement
Table of Contents
