Set-Up And Function; Description Of Function - Bewatec MediTel T5 Operating Manual

Set-up and function

3 Set-up and function
3.1

Description of function

With this telephone device patients are able to do telephone calls like using a normal
telephone they are knowing from home. The telephone is operated by using the foil
keyboard with its function buttons. For the charging of the telephone connection it is
equipped with an integrated ISO-norm chip card reader. An adaption to existing centralized
or decentralized charging systems on side is possible.
The telephone can be optionally fitted or expanded with various modules:
– Module „DTMF charging telephone"
With this module it is possible to support centralized or decentralized charging systems.
The communication between the telephone and the charging system is done via DTMF
communication.
– Module „DTMF charging telephone + TV"
With this module it is possible to support centralized or decentralized charging systems.
The communication between the telephone and the charging system is done via DTMF
communication. Additionally the TV function of a connected TV (MediTec or
MediStream system) can be charged and unlocked.
– Module „Nurse Call"
This module can be used to call the nurse. The "Nurse Call" module, in conjunction with
Function Module II, forms an interface with the existing Nurse Call system.
– Module „Window Blind"
With this module window blinds can be controlled. The module window blind in
combination with the RelaisBox III is an interface to the existing window blind control.
– Module „Light Control"
With this module and in combination with a RelaisBox III it is possible to control lights
within the Patient room. In this application the RelaisBox III is the interface between
the telephone and the on-side light control.
10 / 24 Operating manual MediTel T5