Troubleshooting - Global Truss TW RGB9 Operating Instructions Manual

TW RGB9 7 Channel - DMX Values & Functions
Channel Value
1
1 - 255
2
1 - 255
3
1 - 255
4
5
0 - 15
16 - 255 STROBE/PRGM SPEED SLOW - FAST
6
0 - 127
128 - 159
160 - 191
192 - 223
224 - 255
7
1 - 255
Global Truss - www.globaltruss.com - TW RGB9 Instruction Manual Page 13
© ®
Function
RED
0% - 100%
GREEN
0% - 100%
BLUE
0% - 100%
PLEASE SEE DMX TRAITS AND
VALUES OF 1 CHANNEL MODE
STROBING/PROGRAM SPEED
OFF
PROGRAMS
OFF
COLOR MIXING
RGB CHANGING
7 COLOR CHANGE
SOUND ACTIVE
MASTER DIMMER
0% - 100%
TW RGB9
Locate and remove the unit's power cord. Once the cord has been
removed located the fuse holder located inside the power socket.
Insert a flat-head screw driver into the power socket and gently pry out
the fuse holder. Remove the bad fuse and replace with a new one. The
fuse holder also has a holder for a spare fuse.
TW RGB9
Listed below are a few common problems the user may encounter,
with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are
wired correctly (pin 3 is "hot"; on some other DMX devices
pin 2 may be 'hot'). Also, check that all cables are connected
to the right connectors; it does matter which way the inputs
and outputs are connected.
Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit.
2. Make sure that you are in Sound Active mode.
TW RGB9
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal optical lenses must be carried out periodically to optimize light
output.
1. Use normal glass cleaner and a soft cloth to wipe down the
outside casing.
2. Clean the external optics with glass cleaner and a soft cloth
every 20 days.
3. Always be sure to dry all parts completely before plugging
the unit back in.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).
Global Truss - www.globaltruss.com - TW RGB9 Instruction Manual Page 14
© ®
Fuse Replacement
Trouble Shooting
Cleaning