D-Link DSL-2900AL VIPER User Manual page 85

Section 4 - Configuration
LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router.
LAN IPv6 Link-
Displays the router's LAN link-local address.
Local Address:
Enable Automatic Enable or disable the Automatic IPv6 Address Assignment feature.
IPv6 Address
Assignment:
Enable Automatic
Enable or disable DHCP-PD for other IPv6 routers connected to the
DHCP-PD in LAN: LAN interface.
Note: This feature requires a smaller subnet prefix than /64 (i.e. allowing
for a larger address allocation), such as /63. Contact your ISP for more
information.
Autoconfiguration Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless
DHCPv6.
Type:
Router Enter the IPv6 address lifetime (in minutes).
Advertisement
Lifetime:
Click Save when you are done.
D-Link DSL-2900AL User Manual 81