Canon Speedlite 430EXIII-RT Instruction Manual page 56

a: Fully Automatic Wireless Flash Shooting
Firing group control
Slave flash ready
56
Set the flash mode to <
5
Press the <
<S> cross keys of the master unit.
Turn <9> to select <Q>, then
press <8>.
The slave unit is set automatically to
<a> during shooting via the
control from the master unit.
Check that the firing group control is
set to <8>.
Check the transmission status
6
and charge status.
Check that the <D> lamp is lit in
green.
When the slave flash is ready, the AF-
assist beam emitter blinks at approx.
1-second intervals.
Check that the <Q> slave flash-ready
icon is lit on the master unit's LCD
panel (<G> is not displayed).
For the master unit's LCD panel
illumination, see page 54.
Check that the master unit's flash-
ready lamp is lit.
Check the performance.
7
Press the master unit's test flash button.
The slave unit fires. If it does not fire,
check that it is placed within the
transmission range (p.46).
Take the picture.
8
Set the camera and take the picture
in the same way as with normal flash
shooting.
a
E > button of the
>.