Table of Contents
Advertisement
P10
AUXILIARY FUNCTIONS
Time-out Timer
The purpose of the Time-out Timer is to prevent any single person from
using a channel for an extended period of time.
If you continuously transmit for 300 seconds, the transceiver will stop
transmitting and a tone will sound.
To stop the tone, release the PTT switch. You can press the PTT switch
again to resume transmitting.
Battery Save
The Battery Save function decreases the amount of power used when a
signal is not being received and no operations are being performed (no
keys are being pressed, and no switches are being turned). While the
channel is not busy and no operation is performed for 10 seconds, Battery
Save turns ON.
When a signal is received or an operation is performed, Battery Save
turns OFF.
Low Battery Warning
Low Battery Warning alerts you when the battery needs to be recharged.
While transmitting, if the battery power goes below a predetermined
value, the LED will blink red. When a tone sounds, the transceiver stops
transmitting.
Replace or recharge the battery pack.
Advertisement
Table of Contents
