Specifications - Kenwood KDC-MP102U Instruction Manual

Cd-receiver
Table of Contents

Advertisement

Available languages

Available languages

Specifications

FM tuner section
Frequency range (50 kHz space):
87.5 MHz — 108.0 MHz
Usable sensitivity (S/N= 26 dB):
11.2 dBf (1.0 μV/75 Ω)
Quieting sensitivity (DIN S/N = 46 dB):
19.2 dBf (2.5 μV/75 Ω)
Frequency response (±3 dB): 30 Hz — 15 kHz
Signal-to-Noise ratio (MONO): 63 dB
Stereo separation (1 kHz): 40 dB
AM tuner section
Frequency range (10 kHz space):
530 kHz — 1 700 kHz
Usable sensitivity (S/N= 20 dB): 31 dBμ (36 μV)
CD player section
Laser diode: GaAIAs
Digital filter (D/A): 8 Times Over Sampling
D/A converter: 24 Bit
Spindle speed: 500 rpm — 200 rpm (CLV)
Wow & Flutter: Below Measurable Limit
Frequency response (±1 dB): 20 Hz — 20 kHz
Total harmonic distortion (1 kHz): 0.01 %
Signal-to-Noise ratio (1 kHz): 105 dB
Dynamic range: 90 dB
MP3 decode: Compliant with MPEG-1/2 Audio
Layer-3
WMA decode: Compliant with Windows
Media Audio
USB interface
USB standard: USB1.1/ 2.0 (Full speed)
Maximum supply current: DC 5 V
File system: FAT16/ 32
MP3 decode: Compliant with MPEG-1/2 Audio
Layer-3
WMA decode: Compliant with Windows
Media Audio
Audio section
Maximum output power: 50 W × 4
Full bandwidth power (at less than 1 % THD):
22 W × 4
Speaker impedance: 4 Ω — 8 Ω
Tone action: Bass:
Preout level / load (CD): 2 500 mV/10 kΩ
Preout impedance: ≤ 600 Ω
Auxiliary input section
Frequency response (±3 dB): 20 Hz — 20 kHz
Input maximum voltage: 1 200 mV
Input impedance: 10 kΩ
General
Operating voltage (11 V — 16 V allowable): 14.4 V
Maximum current consumption: 10 A
Installation size (W × H × D):
182 mm × 53 mm × 158 mm
(7-3/16" × 2-1/8" × 6-1/4")
Weight: 2.9 lbs (1.3 kg)
About Audio file
Playable Audio file: MP3 (.mp3), WMA (.wma)
Playable disc media: CD-R/RW/ROM
Playable disc file format: ISO 9660 Level 1/2, Joliet,
Romeo, Long file name.
Playable USB device file system: FAT16, FAT32
Although the audio files are complied with the standards
listed above, the play maybe impossible depending on the
types or conditions of media or device.
About "KENWOOD Music Editor"
This unit supports the PC application "KENWOOD Music
Editor Light ver1.1" or later.
When you use the audio file with database information
added by the "KENWOOD Music Editor Light ver1.1,"
1 A
you can search a file by title, album or artist name using
Music Search.
In the Instruction manual, the term "USB device" is
used to mean the device that contains audio files with
database information added with KENWOOD Music
Editor.
"KENWOOD Music Editor Light ver1.1" is available from
the following web site: www.kenwood.com/cs/ce/
For further information on "KENWOOD Music Editor
Light ver1.1," refer to the site above or the application
help.
Subject to change without notice.
100 Hz ±8 dB
Middle: 1 kHz ±8 dB
Treble: 12.5 kHz ±8 dB
15

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents