Display Screen - Panasonic TC-L32X30 Owner's Manual

Network cameras list
Before using a Network camera, you need to register the camera as shown below. You can also set
Default camera or Disconnect/Delete the registered cameras.
Press "Network cameras list" and

display screen

Set Network camera setting
Network cameras list
Camera name Model Status
Camera 1 BL-C210A Connected
... ...
...
... ...
...
... ...
...
... ...
...
... ...
...
... ... ...
... ...
...
Select OK
RETURN
Find cameras Delete
Disconnect Default camera
For this operation, please refer to the operating
manual for the Network camera.
Software update
Select "Software update"
Menu Network settings
Connection test
Network connection Wireless (WiFi)
Wireless network
IP address/DNS settings
Network cameras list
Software update
Mac address 00-0b-97-7c-65-e9
42
tc_L32_x30_eng_0592.indb 42 tc_L32_x30_eng_0592.indb 42
select
Default
select
OK
Start camera search.
Before you start to search for a camera, switch the
camera to registration mode.
Search condition also depends on "Network settings"
Delete camera information.
Disconnect to camera.
"Disconnected" will be displayed in "Status".
Set to default use.
Displayed "(Default)" next to camera name.
(Available only when reconnecting)
Connect to Camera. "Connect" will be displayed in
"Status".
Press OK to start the Software update screen
Follow directions on the screen
Set "Clock" first. (p. 15)
2011/01/05 11:22:38 2011/01/05 11:22:38