Itec POWER-BOX Instruction Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

POWER-BOX

INSTRUCTION MANUAL

Designed and Manufactured by

ITEC Tontechnik und

Industrieelektronik GesmbH

8200 Laßnitzthal 300

Austria / Europe

Table of Contents

Need help?

Do you have a question about the POWER-BOX and is the answer not in the manual?

Questions and answers

Summary of Contents for Itec POWER-BOX

Page 1: Instruction Manual
POWER-BOX INSTRUCTION MANUAL Designed and Manufactured by ITEC Tontechnik und Industrieelektronik GesmbH 8200 Laßnitzthal 300 Austria / Europe...
Page 2 LECTERN SUCCESS interfaced either via cable or wireless via radio-transmission. However you are going to use the versatile POWER-BOX, you will certainly add the perfect sound to many successful events with this compact, high performance tool so easy to handle.
Page 3: Table Of Contents
ITEC POWER-BOX TABLE OF CONTENTS 1. Saftey instructions 2. How to stand the POWER-BOX 3. How to start 4. Playback 5. Handling with cable microphone 6. Music attenuation (optional) 7. Using a radio microphone 8. Separate control with two radio receiver 9.
Page 4: Saftey Instructions
After the carefully removal of the cover separate the connection cable form the accumulator. 2. How to stand the POWER-BOX Loosen the lower adjusting screw (a) of the aluminiumlight-weight tripod and open the legs of the tripod (asamply as space allows).
Page 5: How To Start
ITEC POWER-BOX 3. How to start General: Turn on the POWER -BOX by turning the ON/OFF switch (1) to the right (position ON); the ON/OFF indicator light (2) will show. Battery mode: In case the power supply is not plugged in the POWER -BOX will be supplied by an integrated rechargeable battery.
Page 6: Handling With Cable Microphone
3 signal - signal earth (US = ground) earth (US = ground) We recommend the ITEC EM 300 electret 6. Music attenuation (optional) capacitor microphone Should your device have an automatic music attenuation the volume of the music playback will be turned down while somebody is speaking.
Page 7: Using A Radio Microphone
10. 12V DC – Output - jack When using ITEC – supplementary devices, for example the CONFERENCE – SET, it is possible to use the supply voltage on this jack (10). Maximum current amounts 0,5A – an installed automatic safety device swit- ches off when an overload takes place.
Page 8: Recording
Do not store below a temperature of 5°C Recharge after use. Not having used the POWER-BOX for months we recommend you switch it on for several hours and then recharge it. 14. General advice Do not place microphones and speakers close to each other in order to avoid acoustic feedback; too great...
Page 9: Changing Batteries Of Radio Microphones
15. Changing batteries of radio microphones Attention: old batteries are hazardous waste; dispose of properly! ITEC WM-716 - hand held microphone (also WM 816 and WM 702) Slide battery lid open, remove top battery and then pull the white plastic strip to remove the other two batteries from the battery compartment.
Page 10: Controls
ITEC POWER-BOX 16. Controls POWER Volume control for cable microphones ON/OFF switch Volume control for external audio source or built-in ON/OFF indicator light CASS-CD-TUNER Mains indicator light Volume control for cable microphone Socket for microphone AUTO MUTE for music attenuation...
Page 11 ITEC POWER-BOX The function of the buttons on the device: Play/Pause Start of the replay; new push: Pause Stop Stop the replay 1 x push = next track, hold pushed longer = fast forward motion 1 x push = start of track or previous track, hold pushed longer = fast return motion...
Page 12 EM-300 cable-bound microphone Auxiliary Playback Devices CD-Player or CD-MP3-USB player integrated in the box Miscellaneous box tripod, flight case, protective cover ITEC- Tontechnik und Industrieelektronik GesmbH, A-8200 Lassnitzthal 300 / Austria / Europe Tel.: +43 (0)3133 / 3780-0, office@itec-audio.com, www.itec-audio.com www.itec-audio.com POWER-BOX...