Remote Controller Instruction - Samsung MR-DH00 User Manual

Remote controller instruction

• Point the remote controller towards the remote controller receiver of the indoor unit.
• When you properly press the button on the remote controller, you will hear beep sound from the indoor unit and a transmit
indicator( ) appears on the remote controller display.
Remote controller buttons
Remote controller display
Power
Turn the air conditioner on/off.
S-Plasma ion
Set the S-Plasma ion function on/off.
Turbo
heat
Cool or your room quickly and
powerfully.
Increase/Decrease the temperature
Air swing
Activate/Deactivate air flow blade
movement automatically left and right
To silence the beep sounds when
pressing the button.
Control from an individual indoor unit
to all indoor units.
On Timer
Set the On Timer on.
Select the function printed
under the button.
• 2 F button function
nd
When you press 2
NOTE
Beep off  Room, Filter reset  Blade
While the function of the button is switched by the 2
previous function of the switched button.
• The functions that don't support your air conditioner model will not operate even if they are on the remote
controller.
4
Temp +-
by 1˚C.
Beep off
Room
nd
2 F
F button, you can change the function of the button as listed below.
nd
F button, press the 2 F button once again to go back to
nd nd
Mode
Select one of the 5 operation modes.
Quiet
Reduce noise generated from an indoor
unit during operation.
Air swing
Activate/Deactivate air flow blade
movement automatically up and down.
(not applicable to Duct type model)
Fan
Adjust amount of air flowing through the
air conditioner with the 4 different fan
speeds such as Auto/Low/Medium/High.
Filter Reset
The filter indicator light will be off.
Blade
Control from an individual blade to all
blades.
Set the mode on.
Set/Cancel
Set or Cancel the on/off timer,
mode.
Off Timer
Set the Off Timer on.