Samsung 650 User Manual page 113

When selecting the Cable TV system:
Press the ENTER button to start the auto program.
Press the • or
~
to select the correct analog signal
cable system source among STO, HRC, and IRC,
then press the ENTER button. If you have Digital
cable TV, select the cable system signal source for
both Analog and Digital.
,. STD, RC and IRC dentlfy vanous ty es of
cable TV sys ems Contact your local cab
e
company
0
identify the type of cable sys em
tha exis s
In
yo r particular area. At this poin
the signal source has b en selec edt
The TV begins memorizing all available stations.
;:;;>
After all the available channels are stored it
tarts to remove scrambled channels The Auto
program menu then reappears.
Y
If you want to stop Auto ProgrammIng, press
the ENTER button. The Stop Auto Program?
message will be displayed. Select Yes by
pressing he ... or ~ button. then press the
E TER button
Press the EXIT button to exit.
English. 9
You can select the type of picture which best corresponds to
your viewing requirements.
Press the MENU button to display the menu.
Press the ENTER button to select Picture.
~
....
-
C ontrast 80
Bnghtness 45
Sharpness 50
Color ·50
Tint (G/R) : G50lR50
Detailed Settings
Picture Options
Press the ENTER button to select Mode.
Press the A or T button to select Dynamic,
Standard, or Movie.
Press the ENTER button.
• Dynamic: Select the picture for high-definition in
a bright room.
• Standard: Select the picture for the optimum
display in the normal environment.
• Movie: Select the picture for viewing movies in a
dark room.
Press the EXIT button to exit.