Adjusting The Headlamps; Vertical Aim Adjustment - Ford 2016 TRANSIT CONNECT Owner's Manual

ADJUSTING THE HEADLAMPS

Vertical Aim Adjustment

If your vehicle has been involved in a crash,
have the aim of the headlamp beam
checked by an authorized dealer.
Headlamp Aiming Target
E142592
A 8 ft (2.4 m)
B Ground to the center of the
headlamp low beam bulb
C 25 ft (7.6 m)
D Horizontal reference line
Vertical Aim Adjustment Procedure
1. Park your vehicle on level ground
approximately 25 ft (7.6 m) from a wall
or screen.
2. Measure the distance from the ground
to the center of the headlamp low
beam bulb and mark an 8 ft (2.4 m)
long horizontal reference line on the
wall or screen at this height.
Tourneo Connect/Transit Connect (CHC) Canada/United States of America, enUSA, First Printing
Maintenance
E199411
Note: There may be an identifying mark on
the lens to help you locate the center of the
bulb.
Note: To see a clearer light pattern while
adjusting one headlamp, you may want to
block the light from the other headlamp.
3. Switch on the low beam headlamps
and open the hood.
E142465
4. On the wall or screen you will observe
a flat zone of high intensity light
located at the top of the beam pattern.
If the top edge of the flat zone of high
intensity light is not on the horizontal
reference line, adjust the aim of the
I n f o r ma t i o n P r o v i d e d b y :
headlamp beam.
205