Honda 2012 CR-Z Owner's Manual page 270

uuChecking and Maintaining Wiper BladesuChanging the Rear Wiper Blade Rubber
Changing the Rear Wiper Blade Rubber
Tabbed End
268
1. Raise the wiper arm off.
2. Slide the wiper blade out from the wiper
arm while pushing the lock tab.
3. Slide the wiper blade out from its holder by
pulling the tabbed end out.
4. Remove the retainer from wiper blade and
mount it to a new rubber blade.
5. Slide the wiper blade onto the holder.
u Make sure it is engaged correctly, then
install the wiper blade assembly onto the
wiper arm.
I n f o r m a t i o n P r o v i d e d b y :
1Changing the Rear Wiper Blade Rubber
NOTICE
Avoid dropping the wiper arm; it may damage the
rear window.