Advertisement
2. Setting up a joystick
2.1 Connect the joystick to your computer's USB port
2.2 Enable the joystick
There are two ways to use a joystick: through firmware, and through software
(1) Through firmware:
The joystick is ready for use immediately after it is connected to the USB port, but the
hotkey buttons will not be functional. On the HFX 1400, to associate the hotkeys with specific
actions—such as pan, patrol, and so forth—follow these steps:
a. On the Home page, right-click in the Live View Window, then select "Joystick
Settings" from the pop-up menu.
Figure 3: Joystick Settings accessible in the Live View window
b. In the Joystick Settings window, select the attached joystick from the drop-down
menu, and then click Configure Buttons.
Figure 2: USB port
6
Application Note
Advertisement
