Advertisement
To set the target time, to turn the target time on and off, and to turn the vibra-
tion alarm on and off
1. While the display is showing all zeros in the Stopwatch
Target time on indicator
Mode, hold down A A A A A , and the hour digit of the target
time starts to flash because it is selected .
Minutes
Hour
2. Press C C C C C to change the selection in the following sequence.
Hour
3. Press D D D D D to increase the selected number or B B B B B to de-
crease it. Holding down either button changes the se-
lection at high speed.
• Press D D D D D and B B B B B at the same time to clear the setting to
0:00' 00".
Seconds
4. Press A A A A A to move the flashing to the target time ON/
OFF setting, which is indicated by the SOUND indica-
Mode indicator
tor flashing on the display.
Vibration alarm on indicator
5. Press D D D D D or B B B B B to toggle the target time on and off.
• Note that the SOUND indicator appears regardless of whether you are using the
audible alarm tone or vibrator. Steps 6 and 7 below control whether an alarm oper-
ation produces an audible tone or vibration.
6. Press C C C C C to move the flashing to the vibration alarm ON/OFF setting, which is indi-
cated by the
indicator flashing on the display.
7. Press D D D D D or B B B B B to toggle the vibration alarm on and off.
8. Press A A A A A to return to the Stopwatch Mode.
Important!
The alarm will not sound if you do not turn on the target time.
• Press A A A A A , C C C C C or L L L L L to stop the alarm after it starts to sound.
ALARM MODE
When the Daily Alarm is turned on, an alarm operation
Alarm on indicator
(20-second tone or 10-second vibration) is performed at
Hourly time signal on
the preset time each day. Press any button to stop the
indicator
alarm after it starts to sound. When the Hourly Time Sig-
Current time
nal is on, the watch beeps every hour on the hour.
To set the alarm time
1. Hold down A A A A A until the hour digits start to flash on the
display. The hour digits flash because they are select-
ed .
• This operation will switch the Daily Alarm on automati-
cally.
2. Press C C C C C to change the selection in the following se-
Minutes
Hour
quence.
Mode indicator
Vibration alarm on indicator
3. Press D D D D D to increase the selected digits and B B B B B to decrease them. Holding down
either button changes the selection at high speed.
• The format (12-hour and 24-hour) of the alarm time matches the format you select
for normal timekeeping.
• When setting the alarm time using the 12-hour format, take care to set the time
correctly as morning (no indicator) or afternoon (P).
4. After you set the alarm time, press A A A A A to return to the Alarm Mode.
Minutes
Seconds
Hour
Minutes
To turn the daily alarm on and off, to turn the hourly time signal on and
off, and to turn the vibration alarm on and off
Press B B B B B while in the Alarm Mode to change the status in the following sequence.
Both OFF
Daily Alarm
Only
Both ON
Vibration ON
(no sound)
/
• The alarm on indicator (
), the Hourly Signal on indicator (
on indicator (
) are shown on the display in all modes while these functions
are turned on.
To test the alarm sound
Hold down B B B B B while in the Alarm Mode to sound the alarm.
The Vibration Alarm is activated while the
Vibration Alarm is not activated and an audible tone sounds for alarms.
• Note that pressing B B B B B also changes the alarm and the hourly time signal ON/OFF
settings.
DUAL TIME MODE
Current time
The Dual Time Mode lets you keep track of the time in
another time zone. You can also select the timekeeping
format (12-hour or 24-hour) separately from the Timekeep-
ing Mode.
To set the Dual Time
1. Hold down A A A A A while in the Dual Time Mode. The hour
digits flash on the display because they are selected .
2. Press C C C C C to change the selection in the following se-
quence.
Hour
Minutes
Mode indicator
3. Press D D D D D to increase the selected digits and B B B B B to de-
crease them. Holding down either button changes the
selection at high speed.
4. After you set the time, press A A A A A to return to the Dual Time Mode.
• In the Dual Time Mode, the seconds count is synchronized with the seconds count
of the Timekeeping Mode.
• In the Dual Time Mode, press B B B B B to toggle between the 12-hour and 24-hour for-
mats.
1922-2
Hourly Time
Both ON
Signal Only
Hourly Time
Daily Alarm
Signal Only
Only
y
) and vibration
is on the display. Otherwise, the
Hour
Minutes
Advertisement
