CONTENTS Features……………………………………………………………………... Preparation………………………………………………………………….. Assembling the detector………………………………………………… Installing the batteries…………………………………………………… Using headphones……………………………………………………….. Listening safely…………………………………………………………… Functions and indications………………………………………………….. A quick look at the detector……………………………………………… Displays…………………………………………………………………… Tones……………………………………………………………………… Operation……………………………………………………………………. Turning on the detector………………………………………………… Setting the operation mode……………………………………………… Testing and using the detector………………………………………….. Indoor testing and use………………………………………………… Outdoor testing and use……………………………………………….
With your Metal Detector with Headphones, you can hunt for coins, relics, jewellery, gold, and silver just about anywhere. The detector is versatile and easy to use. The detector’s features include: LCD Display—shows the probable type of metal with an arrow, the depth of the target, DISC/NOTCH range, the level of SENS with segment, the operating mode, and low battery indication.
7. Loosen the knob at the search coil’s end, and then adjust the search coil to the desired angle so that it is parallel with the ground. Then tighten the knob. Caution: Do not over-tighten the search coil or use tools such as pliers to tighten it. 8.
FUNCTIONS AND INDICATIONS 1. A QUICK LOOK AT THE DETECTOR TARGET INDICATOR LCD SCREEN INDICATION PANEL VOLUME CONTROL FUNCTION PANEL OPERATION MODE BUTTONS UP & DOWN SENSITIVITY DISC/NOTCH POWER 2. DISPLAYS The target indicator includes target icons and LCD displays and is located at the top of the detector. It can indicate coins of different type, gold, silver etc.
SILVER Range 1¢ 25¢--indicates that the target possibly has a silver content. Some large aluminium coins might register within 1¢ 25¢ category. TONES If the detector is set to the ALL METAL target mode, it sounds a single tone when it detects any type of metal. If you set the detector to the DISC or NOTCH modes, the built in audio identification system sounds a unique audio tone for each of three categories of metal.
TESTING AND USING THE DETECTOR To learn how the detector reacts to different metals, you should test it before you use it the first time. You can test the detector indoors and outdoors. Indoor Testing and Use 1. Switch the POWER switch to ON. 2.
Correct Incorrect Sweep slowly. Hurrying will cause you to miss targets. It is better you sweep the search coil from side to side in an arc line of 7.5cm (3 inches) motion and keep the search coil parallel with the ground. If the detector detects the item, it sounds a tone.
Follow these steps to pinpoint a target: 1. When the detector detects a buried target, continue sweeping the search coil over the target in a narrowing side-to-side motion. 2. Make a visual note of exact spot on the ground where the detector beeps. 3.
Need help?
Do you have a question about the 8042 and is the answer not in the manual?
Questions and answers