Opel Cascada Owner's Manual page 219

remove conus and take out the
spare wheel.
Under the spare wheel there is a
box and a bag with vehicle tools.
4. Change the damaged wheel
3 213 and stow the tools back in
the tool box and the bag. Remove
the strap from the box and put
aside.
5. Secure the tool box by turning
right back the wing nut with the
conus. Put the bag in the well.
6. Stow the damaged wheel outside
up in the well.
7. Place the loop end of the strap
through the left rear lashing eye.
8. Place the hook end of the strap
through the loop and pull it until
the strap is fastened securely to
the lashing eye.
Vehicle care
9. Insert the strap through the
spokes of the wheel as shown in
the illustration.
10. Mount the hook to the right rear
lashing eye.
11. Tighten the strap and secure it
using the buckle.
12. Deposit the floor cover on the
wheel.
13. If equipped, secure coupling ball
bar in the bag at a lashing eye in
the load compartment.
14. Fold out the load compartment
partition before opening the soft
top.
217