ION DOCS2GO Quick Start Manual page 4

FEATURES
1. PAPER GUIDE – This piece adjusts to help guide the paper into the scanner.
2. FEED SLOT – Insert your paper or photo into this slot when scanning.
3. POWER– Press and hold this button for 3-5 seconds to turn the scanner on/off.
4. MINI-USB PORT (rear panel) – Use the included mini-USB cable to connect
this port to a 10W USB power adapter (sold separately)
5. iPad* DOCK – Connect your iPad to this dock to scan your photos or
documents.
6. PAPER EXIT SLOT (rear panel) – Outputs the paper or photo after scanning.
* iPad is a trademark of Apple Inc., registered in the U.S. and other countries.
CHARGING YOUR iPad
1. Connect one end of the mini-USB cable to the
scanner's USB port, and the other end to the AC
adapter (that came with your iPad) which
connects to the power outlet.
2. Connect iPad to the scanner's 30-pin port. Your
iPad will now begin charging.
Notes:
•
To properly charge your iPad, you must connect it to
the dock when the scanner is turned off.
•
If your iPad does not appear to be charging, make
sure the scanner is off, then disconnect and
reconnect your iPad.
• In case of insufficient battery power, charge your
iPad when the battery level drops to 20% or
less.
5
2
6
4
4
3
1