Advertisement
Operation of Amplifier LEDs
All L-com amplifiers have to LEDs visible on the enclosure.
The LED marked TX indicates that the amplifier is transmitting a signal. This LED will flash during such
operation.
The LED marked RX indicates that the amplifier is receiving a signal. This LED will flash during such
operation.
When the amplifier is transmitting and receiving signals at the same time, both LEDs will flash.
*Note: Some amplifier models have a red TX LED for extra visibility. A flashing red LED does not
indicate a fault.
RX = Receive LED
TX = Transmit LED*
L-COM, INC. 45 BEECHWOOD DRIVE NORTH ANDOVER, MA 01845
WWW.L-COM.COM E-MAIL: SALES@L-COM.COM PHONE: 1-800-343-1455 FAX: 1-978-689-9484
© L-com, Inc. All Rights Reserved. L-com Global Connectivity and the L-com logo are registered marks.
Advertisement
