LG LM-2421C2L/A2L Service Manual page 20

For left rear pipings
3. Route the indoor tubing with the drain hose to
the piping hole as desired position.
4. Insert the pipings and the connecting cable
into the piping hole.
5. Insert the connecting cable into the indoor
unit.
• Don't connect the cable to the indoor unit.
• Make a small loop with the cable for easy con-
nection later.
6. Tape the tubing, drain hose and the connecting
cable.
• To remove the holder,
press the bottom of the
chassis near the holder
upwards and the tab is
clear of its hole.
• Turn it clockwise approx.
90° and remove it.
Outdoor
Indoor/Outdoor
connecting
cable
Taping
Connecting
cable
- 20 -
Drain hose
Tubing holder
2
1 Press
Indoor
Connecting cable
Connecting piping
Drain pipe
Gas side piping
Liquid side piping
Draing hose
Pull