Communicate With Pc (Imac Or Ibm Pc); Connecting To A Computer - QuickPad PRO User Manual

Change sticky keys – Sticky keys refer to the use of the
the sticky keys feature enabled, you must hold down
another key. For example, to capitalize the letter a, you would hold down
a simultaneously. With the sticky key enabled, you can simply press
and the next letter you press will be capitalized. The same applies to the
change this setting, press 2 or highlight the box labeled CHANGE STICKY from the
F
second options menu. Toggle between (Sticky Keys)
, and press when you have finished.
SPACEBAR ENTER
Change keyboard settings -- There are two settings that apply to the keyboard: key
delay and key repeat. "Key delay" refers to the response speed from when you type a key
to when it appears on the screen (1 being the fastest and 4 being the slowest). "Key
repeat" refers to the speed of repetition when you hold down a key (1 being the slowest
and 32 being the fastest). For example, if you have key repeat set to one and you hold
down the letter a in a text field, subsequent a's will appear rather slowly. To change these
settings, open the second options menu screen and press
KEY SPEED. Use the left and right arrow keys to navigate the window and numerically
type in your desired speeds. When finished press
2.3. C W PC (MAC
OMMUNICATE ITH
QuickPAD Pro offers multiple methods of communicating with Macintosh and
Windows-based computers. Depending on the direction of the data transfer, the size of
the file to be transferred and the available interfaces on your computer, you can
determine the method that is best for you. The following information in this section
discusses these different methods, as well as general know-how for transferring files and
setting up the communication links.

2.3.1. Connecting to a Computer

There are three ways to directly connect QuickPAD Pro to a personal computer: USB,
Serial, and Infrared (IR). Both of the physical cables, USB and Serial, come standard in
the QuickPAD Pro package. The IR receiver, however, is an optional purchase and can
be obtained by contacting QuickPAD Technology Corporation.
How To
Connect using a USB cable – Using any standard USB cable (the one included is black),
insert the square-shaped end into the back of the QuickPAD and the thin rectangular end
into the back of your computer. Connect the cable only after QuickPAD is turned on.
Since USB is plug-and-play, you should not need to manually install any drivers on your
computer. However, if there is no response or activity from your computer when you
insert the USB cable you may need to manually install a USB driver or adjust the USB
transfer speed. If this is the case, please refer to the troubleshooting guide at the end of
this section.
10
and keys. Without
SHIFT CTRL
or in conjunction with
SHIFT CTRL
and press
SHIFT
and release,
SHIFT
key. To
CTRL
and (Sticky Keys) with the
ON OFF
3 or select the box labeled SET
F
to exit and save changes.
ENTER
IBM PC)
OR
[Home]
Move cursor to first page
Up and down Scroll through appointments in a time slot
arrow keys
[Enter] Edit text
[ D ]
Set duration of an appointment
[ V ]
View details of appointment
How To
Enter appointments on a particular day – In the calendar view, use calendar
navigation keys ( , , g p, g n) to select the calendar month and year you want to
P N P U P D
edit. Once you have the correct calendar on-screen, highlight a day using the arrow keys
and press . This will bring you to the appointment screen. Using the navigation
ENTER
keys for the appointment view, you can move the cursor to the time slot you want to edit.
Press to begin typing. When you have finished typing the appointment text, press
ENTER
again to complete the entry.
ENTER
Set date/time duration – From the appointment view, press
DATE/TIME DURATION window. Using the left and right arrow keys, highlight the
number you want to change. You can either type in the desired changes or use the up and
down arrow keys to select the appropriate dates and times. When finished, press
follow the prompt to save or discard your changes.
3.4.4. Option Settings and File Transfers
How To
Change settings – From any main screen in the personal organizer (the four primary
functions will be listed at the top), you can press
the options window, you can use the arrows,
information fields. If a box appears around the field value, you can use the
toggle between options. Otherwise, simply type the desired value at the blinking cursor.
When you have finished changing the settings, press
• Dialer settings for host region* – The first area of options refers to your personal
phone settings. Enter the appropriate values corresponding to the country, area and
specific location in which you currently reside. The
field is for those areas that require 10-digit dialing. If you must dial the area
AREA
code within your own area for local calls, switch this setting to
• Modem settings* – The Modem port identifies the communications port as COM1.
The Baud rate identifies the transfer speed rate.
• General settings – You can change three settings in the general settings field. The
first setting is the startup program. By default, when the personal organizer is selected
from the QuickPAD Pro main menu, the contact screen opens. You can change this
27
to access the SET
D
and
ESC
to enter the options window. Once in
O
key or key to switch between
TAB ENTER
to
SPACEBAR
to save and exit.
ESC
DIAL AREA CODE WITHIN SAME
.
YES